2-cyclopentenone 1-alkyne

The reaction of allyl halides with terminal alkynes by use of PdClifFhCNji as a catalyst affords the l-halo-l,4-pentadienes 297. 7r-AlIylpalladium is not an intermediate in this reaction. The reaction proceeds by chloropalladation of the triple bond by PdCh, followed by the insertion of the double bond of the allyl halide to generate 296. The last step is the regeneration by elimination of PdCh, which recycles[148]. The cis addition of allyl chloride to alkynes is supported by formation of the cyclopentenone 299 from the addition product 298 by Ni(CO)4-catalyzed carbonylation[149]. 

The reaction of an alkyne 1 and an alkene 2 in the presence of dicobaltoctacar-bonyl to yield a cyclopentenone 3 is referred to as the Pauson-Khand reaction Formally it is a [2 + 2 + 1 ]-cycloaddition reaction. The dicobaltoctacarbonyl acts as coordinating agent as well as a source of carbon monoxide. 

Initial step is the formation of a dicobalthexacarbonyl-alkyne complex 5 by reaction of alkyne 1 with dicobaltoctacarbonyl 4 with concomitant loss of two molecules of CO. Complex 5 has been shown to be an intermediate by independent synthesis. It is likely that complex 5 coordinates to the alkene 2. Insertion of carbon monoxide then leads to formation of a cyclopentenone complex 6, which decomposes into dicobalthexacarbonyl and cyclopentenone 3 ... 

The simple cyclopropylmethoxycarbenechromium complex 142 reacts with alkynes to afford cyclopentenones 143 and 144 via the cyclopentadiene intermediate 145, which is hydrogenated with the aid of the chromium(O) residue and water (Scheme 31) [100-103]. Formation of 145 can be regarded as... 

Scheme 31 Formation of cyclopentenones 143 and 144 by a formal [4+2+1-2] cocyclization from the cyclopropylmethoxycarbenechromium complex 142 and alkynes [100-103]...

Other examples of [2C+2S+1C0] cycloaddition reactions have been described by Herndon et al. by the use of chromium cyclopropyl(methoxy)carbenes. These complexes react with alkynes releasing ethene and forming cyclopenta-dienone derivatives, which evolve to cyclopentenone derivatives in the presence of chromium(O) and water [122] (Scheme 76). This reaction has been extended to intramolecular processes and also to the synthesis of some natural products [123]. These authors have also described another process involving a formal [2C+2S+1C0] cycloaddition reaction. Thus, the reaction of methyl and cyclo-propylcarbene complexes with phenylacetylene derivatives does not afford the expected benzannulated products, and several regioisomers of cyclopentenone derivatives are the only products isolated [124] (Scheme 76). 

Chromium cyclopropylcarbene complexes react with alkynes to provide cyclopentenone derivatives in a formal [2c+2s+lCo] cycloaddition process (see Sect. 3.2). However, tungsten and molybdenum cyclopropylcarbene complexes... 

The reaction of alkenes with alkenes or alkynes does not always produce an aromatic ring. An important variation of this reaction reacts dienes, diynes, or en-ynes with transition metals to form organometallic coordination complexes. In the presence of carbon monoxide, cyclopentenone derivatives are formed in what is known as the Pauson-Khand reaction The reaction involves (1) formation of a hexacarbonyldicobalt-alkyne complex and (2) decomposition of the complex in the presence of an alkene. A typical example Rhodium and tungsten ... 

Alkenyl sulfoxides 177 and 178, which can be readily prepared from l-alkynes provide synthones for the carbocations 179 and 180. These synthones are useful for the simple construction of cyclopentenones and also in providing an electrophilic precursor for the -side-chain on prostanoids ". ... 

Sugihara et al. in 1997.106 They utilized aqueous ammonium hydroxide as a reaction medium, which provided ammonia as a hard ligand to labilize the CO ligands and therefore enhance the rate of the PKR. The reaction of dicobalthexacarbonyl complexes of enynes and alkynes provided expected cyclopentenones via intramolecular and intermolecular modes respectively (Scheme 4.10). 

Co-catalyzed transformations are concerned mainly with the [2+2+2] cycloadditions of three alkyne groups to give arenes. Another important reaction is the [2+2+1] cycloaddition of alkynes, alkenes and CO to give cyclopentenones, which is the well-known as Pauson-Khand reaction [272]. 

The presence of a cyclopropyl moiety in the carbene complexes makes them useful for synthesis. The cyclopropylcarbene complexes 95 undergo a cycloaddition reaction with alkynes to give the cyclopentenones 96 [51]. The reaction course is explained as being metallacyclopentene fragmentation. (Scheme 34)... 

The [2+2+1] cycloaddition of an alkene, an alkyne, and carbon monoxide is known as the Pauson-Khand reaction and is often the method of choice for the preparation of complex cyclopentenones [155]. Groth and coworkers have demonstrated that Pauson-Khand reactions can be carried out very efficiently under microwave heating conditions (Scheme 6.75 a) [156]. Taking advantage of sealed-vessel technology, 20 mol% of dicobalt octacarbonyl was found to be sufficient to drive all of the studied Pauson-Khand reactions to completion, without the need for additional carbon monoxide. The carefully optimized reaction conditions utilized 1.2 equivalents of... 

Pauson-Khand cyclopentenone synthesisThe cycloaddition of an alkene with an alkyne complexed with Co2(CO) usually furnishes a mixture of two cy-clopentenones when the alkene is unsymmetrical. The regioselectivity can be improved markedly if the alkene bears a heteroatom that can coordinate with the cobalt complex. Both sulfur and nitrogen ligands can improve the yield and regio-control of this reaction. 

Similarly, a double functionalization can be reached when an activating group is present in close vicinity to the triple bond. Tsuji et al. have discovered that with a diphosphine palladium(O) complex, a carbonate function in the a-position of the alkyne provides by decarboxylation a palladium methoxy species on which the alkyne moiety can be isomerized into an al-lenyl a -bonded group. CO insertion in the Pd - C bond, reductive elimination with the methoxy group and further cyclization with incorporation of a second CO molecule give rise to the corresponding cyclopentenone as shown in Scheme 21 [127]. 

Abstract The transition metal mediated conversion of alkynes, alkenes, and carbon monoxide in a formal [2 + 2+1] cycloaddition process, commonly known as the Pauson-Khand reaction (PKR), is an elegant method for the construction of cyclopentenone scaffolds. During the last decade, significant improvements have been achieved in this area. For instance, catalytic PKR variants are nowadays possible with different metal sources. In addition, new asymmetric approaches were established and the reaction has been applied as a key step in various total syntheses. Recent work has also focused on the development of CO-free conditions, incorporating transfer carbonylation reactions. This review attempts to cover the most important developments in this area. 

An important procedure for the synthesis of cyclopentenones is the so-called Pauson-Khand reaction, which constitutes a formal [2 + 2 + 1] cycloaddition of an alkene, an alkyne, and carbon monoxide. Due to the increase in structural diversity of the available starting materials, the reaction has become an attractive target for scientific investigations [1-8]. The first successful example was reported by Pauson, Khand et al [9] in 1973 for the conversion of norbornene with the phenylacetylene-hexacarbonyldicobalt complex to give the corresponding cyclopentenone in 45% yield (Eq. 1). 

A proposed mechanism of this reaction was reported by Magnus and Principle [10], which is nowadays widely accepted (Scheme 1). Recently, negative-ion electrospray collision experiments have confirmed this mechanism in detail [11]. Starting with the formation of the alkyne-Co2(CO)6 complex 2, olefin 3 coordination and subsequent insertion takes place at the less hindered end of the alkyne. The in situ formed metallacycle 4 reacts rapidly under insertion of a CO ligand 5 and reductive elimination of 6 proceeds to liberate the desired cyclopentenone 7. It is important to note that all the bond-forming steps occur on only one cobalt atom. The other cobalt atom of the complex is presumed to act as an anchor which has additional electronic influences on the bond-forming metal atom via the existing metal-metal bond [12]. 

Conversion of a Co2(CO)6-alkyne complex into a cyclopentenone is the Pauson-Khand reaction. It proceeds by loss of CO from one Co to make a 16-electron complex, coordination and insertion of the C6=C7 K bond into the C2-Co bond to make the C2-C6 bond and a C7-Co bond, migratory insertion of CO into the C7-Co bond to make the C7-C8 bond, reductive elimination of the C1-C8 bond from Co, and decomplexation of the other Co from the C1=C2 k bond. The mechanism is discussed in the text (Section B.l.f). 

The reaction of alkoxy(alkyl)carbene chromium complexes with alkynes has been reported to give modest yields of cyclopentenones [368] and a few examples of intramolecular carbene C-H insertions of Fischer-type carbene complexes, leading to five-membered heterocycles, have been reported [369,370] (Table 2.22). 

The Pauson-Khand reaction involves the aimulation of an alkene, an alkyne and carhon monoxide to yield cyclopentenones. Recently, it was shown that in this respect polymer-hound species (60) is an effective catalyst which may be generated by heating Co2(CO)g with polystyrene-bound phosphine (Scheme 4.37) [129]. 

The intramolecular 2 - - 2 - - 1-cycloadditions of allene, alkyne (106), and carbon monoxide yield a -methylene-(107) or 4-alkylidene-cyclopentenones (108) depending on the allene structure or the reaction conditions (Scheme 4i).i59.i6o The cobalt-catalysed 4 - - 2 - - 2-cycloaddition of norbornadienes (109) with buta-1,3-dienes readily produces cycloadducts (110) when a bimetal system is used (Scheme A2) ... 

Transition-metal-promoted cycloaddition is of much interest as a powerful tool for synthesis of carbocyclic stmcture in a single step. Utilization of carbon monoxide as a component of the cycloaddition reaction is now widely known as the Pauson-Khand reaction, which results in cyclopentenone formation starting from an alkyne, an alkene, and carbon monoxide mediated by cobalt catalyst. Although mechanistic understanding is limited, a commonly accepted mechanism is shown in Scheme 4.16. Formation of dicobalt-alkyne complex followed by alkene... 

Several reports have appeared on the effect of additives on the Pauson-Khand reaction employing an alkyne-Co2(CO)6 complex. For example, addition of phosphine oxide improves the yields of cyclopentenones 119], while addition of dimethyl sulfoxide accelerates the reaction considerably [20]. Furthermore, it has been reported that the Pauson-Khand reaction proceeds even at room temperature when a tertiary amine M-oxide, such as trimethylamine M-oxide or N-methylmorpholine M-oxide, is added to the alkyne-Co2(CO)6 complex in the presence of alkenes [21]. These results suggest that in the Pauson-Khand reaction generation of coordinatively unsaturated cobalt species by the attack of oxides on the carbonyl ligand of the alkyne-Co2(CO)6 complex [22] is the key step. With this knowledge in mind, we examined further the effect of various other additives on the reaction to obtain information on the mechanism of this rearrangement. 

The reaction using 11a as a substrate in the presence of several oxides as additives revealed that addition of tributylphosphine oxide, hexamethylphos-phoric triamide, and dimethyl sulfoxide all accelerate the reaction considerably. Furthermore, when about 10 molar amounts of N-methylmorpholine M-oxide (NMO) is added to the alkyne-cobalt complex 12b in THF,the reaction proceeds even at room temperature and cyclopentenone 13 b is obtained in 37% yield accompanied by another rearranged product, the methylenecyclobutanone 35, obtained in 23% yield as a mixture of ( )-and (Z)-isomers (Scheme 14). These facts indicate that dissociation of the carbonyl ligand of the alkyne-cobalt complex 12 is the rate-determining step in this rearrangement. This is also supported by the fact that under a CO atmosphere in refluxing THF the reaction is completely suppressed. 

The most significant progress that has been described to date in the area of rhodium-catalyzed asymmetric hydroacylation of olefms/alkynes with aldehydes has involved intramolecular processes that generate either cyclopentanones or cyclopentenones. Fig. 4.2 illustrates two of the more likely mechanisms for these ring-forming reactions [12, 13]. 

Rhodium complexes are able to transform various enynes 1 into the corresponding bi-cyclopentenones 2 with equal efficiency to that found with cobalt, and facilitate previously formidable PK reactions. The scope of the substituents on the alkyne for the intramolecular reaction is broad alkyl la/b and aryl-substituted substrates Ic provide the desired products in excellent yield with both [RhCl(CO)2]2 and [RhCl(CO)dppp]2 (Tab. 11.3). 

The alkyne-cobalt carbonyl complex 3 formed from the alkyne 1 and dicobalt octacarbonyl 2 should lose at least one of the GOs on the metal to provide the vacancy for the incoming olefins. Subsequently, an olefin-bound complex 5 rearranged oxidatively to yield a metallacyclic intermediate 6. Migratory insertion of GO of 6 would provide the homologated ring intermediate 7, and the following two successive reductive eliminations afford the cyclopentenone... 

In a subsequent study, they used ethylene for a dual purpose, as a substrate as well as a supercritical fluid solvent. This notoriously unreactive olefin to PKR served nicely to give 2-substituted cyclopentenones. Reaction efficiency of each alkyne substrate can be tuned by changing catalyst precursors. Not only Co2(CO)8 but also the two cobalt clusters [Co4(CO)i2] and [Co4(GO)n P(OPh)3 ] work well for some substrates (Equation (8)). The comparison with Rautenstrauch s result clearly shows the beneficial effect of this approach. 

---