Oxygen sensors crucible type

Detailed analysis of the steady-state voltage chatacter-istics of both the thick film oxygen sensor and the crucible type oxygen sensor are shown. [Pg.101]

The objectives of this study were twofold (1) to develop a new type of oxygen sensor which makes the crucible-type sensor more compact and which does not use air as a reference gas, (2) to analyze output characteristics of both the newly-developed zirconia oxygen sensor and the crucible-type oxygen sensor. [Pg.102]

Figure 1. Schematic drawing and voltage curve for crucible-type oxygen sensor...

Crucible-type oxygen sensor with catalytic electrode. In this case, the solid electrolyte is non-porous and the sensor current 1=0. [Pg.109]

Crucible-type oxygen sensor with non-catalytic electrode. A non-catalytic electrode (e. g. Au) is thought to delay the reaction rate in the following reaction... [Pg.110]

Sensor voltage characteristics of the crucible type oxygen sensor. According to the oxygen sensor model used in this analysis, the oxygen partial pressure Po2(0) at the measurement electrode can be expressed by Equations 28- 32, 3, and 35. Calculated results for the sensor voltage are shown in Figure 9-... [Pg.111]

The voltage characteristics of the sensor are almost identical to those of the conventional crucible-type oxygen sensor. [Pg.118]

Big Chemical Encyclopedia