Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Critical strain energy release

G. Critical strain energy release rate J/m J/m U Fluidization gas velocity cm/s ft/s... [Pg.1821]

The critical strain energy release rate is the energy equivalent to fracture toughness, first proposed by Griffith [Phil. Trans. Royal Soc., A22I, 163 (1920)]. They are related by... [Pg.1887]

Gf = toughness (sometimes, critical strain energy release rate). Usual units kj m 2 ... [Pg.135]

Step 2. After a contact time t, the material is fractured or fatigued and the mechanical properties determined. The measured properties will be a function of the test configuration, rate of testing, temperature, etc., and include the critical strain energy release rate Gic, the critical stress intensity factor K[c, the critical... [Pg.354]

Gc is a material property which is referred to as the toughness, critical strain energy release rate or crack extension force. It is effectively the energy required to increase the crack length by unit length in a piece of material of unit width. It has units of J/m. ... [Pg.122]

A third mode of action of hydrogen assumes that the fracture remains inherently ductile, but that the deformation becomes highly localised, thereby markedly reducing the critical strain energy release rate. [Pg.1243]

Critical stress intensity factor Klc and critical strain energy release rate G1C quantify the stability of a polymer against the initiation and propagation of cracks. Stress intensity factor and energy release rate G, are not independent but they are related [76] by means of the appropriate modulus E. ... [Pg.341]

Materials Young s Modulus (GPa) Ultimate Tensile Strength (MPa) Critical Stress Intensity Factor K c (MN m- /2) Critical Strain Energy Release Rate, G c (J m-2)... [Pg.528]

Table 9. Critical strain energy release rates, G ., for common thermoplastics measured under impact loading promoting brittle fracture [92]... Table 9. Critical strain energy release rates, G ., for common thermoplastics measured under impact loading promoting brittle fracture [92]...
GICoo Critical strain energy release rate at infinite time... [Pg.236]

The fracture behaviour of polymers, usually under conditions of mode I opening, considered the severest test of a material s resistance to crack initiation and propagation, is widely characterised using linear elastic fracture mechanics (LEFM) parameters, such as the plane strain critical stress intensity factor, Kic, or the critical strain energy release rate, Gic, for crack initiation (determined using standard geometries such as those in Fig. 1). LEFM... [Pg.80]

See other pages where Critical strain energy release is mentioned: [Pg.1887]    [Pg.132]    [Pg.288]    [Pg.297]    [Pg.300]    [Pg.498]    [Pg.401]    [Pg.402]    [Pg.425]    [Pg.519]    [Pg.232]    [Pg.262]    [Pg.46]    [Pg.234]    [Pg.236]    [Pg.87]    [Pg.217]    [Pg.238]    [Pg.396]    [Pg.76]    [Pg.498]    [Pg.431]    [Pg.1646]    [Pg.636]   
See also in sourсe #XX -- [ Pg.368 ]



SEARCH



Critical elastic strain energy release rate

Critical energies

Critical strain energy

Critical strain energy release rat

Critical strain energy release rates

Critical strain-energy release data

Energy released

Gc, critical strain energy release rate

Releasing Energy

Strain energy

Strain energy release

Strain release

© 2024 chempedia.info