Corrosion testing ASTM

Corrosive sulfnr componnds can be detected by their effect on copper and the form in which the general copper strip corrosion test (ASTM D1838) for petrolenm prodncts is applied to liqnefied petrolenm gas. Hydrogen sulfide can be detected by its action on moist lead acetate paper, and a procedure is also used as a measure of sulfur compounds. The method follows the principle of the standard Doctor test. 

G30, Standard Practice for making and using U-bend Specimens for Stress-Corrosion Testing, ASTM, West Conshohoken, PA, 1997. 

HS Isaacs, B Vyas. Scanning reference electrode technique in Localized Corrosion. In F Mansfeld, U Bertocci, eds., Electrochemical Corrosion Testing. ASTM STP 727 3, 1981. 

Epelboin I., Gabrielli C., Keddam M. and Takenouti H., in Electrochemical Corrosion Testing. ASTM Special Technical Publication 727, 1981 150. 

Stress corrosion testing methods, in Stress Corrosion Testing, ASTM STP 425 ASTM International, West Conshohocken, PA, 1967, pp. 3—20. 

JO] Electrochemical Corrosion Testing, ASTM STP 727, U. Bertocci and F. Mansfeld, Eds., ASTM International, West Consho-hocken, PA, 1979. 

Waldron, L., "Basic Requirements in the Standardization of the Salt Spray Corrosion Test," ASTM Proceedings, Vol. 44, 1944, pp. 654-662. 

The following discussion on testing for detecting susceptibility to inteigranular attack is limited to the tests included in the above four ASTM standards for stainless alloys. The only other ASTM standards on inteigranular corrosion testing, ASTM G 67 and G 110, are for certain aluminum alloys. These two tests are discussed in the chapter by Lifka in this manual. 

Ishikawa, Y., Hosaka, N., and Hioki, S., Galvanic Corrosion of Copper Alloys, Electrochemical Corrosion Testing, ASTM STP 727,1981, pp. 327-338. 

McNeil, M. B. and Odom, A. L., Thermodynamic Prediction of Microbiologically Influenced Corrosion (MIC) by Sulfate-Reducing Bacteria (SRB), Microbiologically Influenced Corrosion Testing, ASTM STP 1232, 1994, pp. 173-179. 

---