Cooling Tower Institute

Peformance Curves, Cooling Tower Institute, Houston, Tex., 1967. [Pg.107]

Acceptance Testing Test procedures to determine the water cooling capacity of towers. Instrumentation used and measurement procedures should be those recommended by the Cooling Tower Institute (CTI) in its "Acceptant Text Procedures. "... [Pg.89]

Cooling Tower Institute International organization of cooling tower engineers, manufacturers and users, dedicated to improving the professional and technical state of the art. [Pg.90]

Additional detailed information is available from the Cooling Tower Institute, including ATF-105 Acceptance Test Procedure for Water-Cooling Towers, STD-101 CTI Grades of Redwood Lumber [31], STD-102 Structural Design Data [70], and TSC-302 Cooling Tower Wood Maintenance [16],... [Pg.383]

It is recommended that performance tests be specified and conducted in accordance with the Cooling Tower Institute procedure, as this gives the process engineer a standard of reference. Most cooling tower manufacturers are members of this Institute. [Pg.385]

Acceptance Test Procedure for Water-Gooling Towers, ATP-105, Cooling Tower Institute, Palo Alto, Calif. [Pg.411]

Cooling Tower Institute Performance Curves (Houston, 1967). [Pg.786]

Wetegrove, R.L., et al. Cooling Tower Institute, 1996, Paper No. TP96-09. [Pg.62]

The Cooling Tower Institute (1967) standardized their work in terms of a Chebyshev numerical integration of Eq. (9.25). In this method, integrands are evaluated at four temperatures in the interval, namely,... [Pg.278]

At the time of completion of an installation, the water and air conditions and the loads may not be exactly the same as those of the design specification. Acceptance tests performed then must be analyzed to determine if the performance is equivalent to that under the design specifications. Such tests usually are performed in accordance with recommendations of the Cooling Tower Institute. [Pg.285]

Cooling Tower Institute, Performance Curves, CTI, Spring, TX, 1967. [Pg.285]

The Cooling Tower Institute has also recommended the following equation for the performance of commercially used cooling tower packings. [Pg.111]

Figure 6.11 Equation 6.8 correlates mechanical-draft performance data. (Data obtained from Cooling Tower Institute Bulletin PFM-110.)...

McDowell, D. W., Jr. The Corrosion Engineer Looks at the Cooling Tower, Cooling Tower Institute, Houston, TX (June 1964). [Pg.161]

The cooling tower must be guaranteed to perform as specified herein when tested in accordance with the Cooling Tower Institute Acceptance Test Procedure ATP-105, latest revision. Should the... [Pg.175]

Cooling Tower Institute, Annual Meeting, 1974 Meeting... [Pg.284]

On a slightly more modest yet nonetheless effective scale, details on various cooling water technical papers, related publications, training courses, conventions, etc. are available on a number of information databases. These details can be accessed by simply logging on to the appropriate Web site, for example, that of the (U.S.-based) Cooling Tower Institute (htpp //www.cti.org) or Association of Water Technologies (htpp //www. awt.org). [Pg.395]

Willa, James. Evolution of the Water Cooling Tower. CTI Journal, 1992, Vol. 13, No. 1, Cooling Tower Institute, USA. [Pg.456]

Zuhl, Robert W. Amjad, Zahid Masler III, William F. A Novel Polymeric Material for Use in Minimizing Calcium Phosphate Fouling in Industrial Cooling Water Systems. Cooling Tower Institute Paper No. TP87-7, USA, February 1987. [Pg.456]

See also in sourсe #XX -- [ Pg.65 , Pg.85 , Pg.90 ]

See also in sourсe #XX -- [ Pg.6 , Pg.284 , Pg.330 ]

See also in sourсe #XX -- [ Pg.395 ]

See also in sourсe #XX -- [ Pg.65 , Pg.85 , Pg.90 ]

See also in sourсe #XX -- [ Pg.65 , Pg.85 , Pg.90 ]

See also in sourсe #XX -- [ Pg.775 , Pg.786 ]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...