Cooling double recirculating

Figure 4. Schematic of a double recirculating cooling system...

Double-Pipe Scrapea-Surface Crystallizer This type of equipment consists of a double-pipe heat exchanger with an internal agitator fitted with spring-loaded scrapers that wipe the wall of the inner pipe. The cooling hquid passes between the pipes, this annulus being dimensioned to permit reasonable shell-side velocities. The scrapers prevent the buildup of solids and maintain a good film coefficient of heat transfer. The equipment can be operated in a continuous or in a recirculating batch manner. 

Under some wind conditions, a portion of the warm moist air leaving the tower may recirculate back through tire tower inlet and thus degrade performance. Forced-draft towers have recirculation rates that are about double those of induced-draft towers. Both water loading and tower height play the dominant role in- recirculation. Correlations exist in the literature for defining the effects of these parameters, and corrections can be applied to the wet-bulb temperature [2,3], Cooling tower fabricators can supply data to estimate the severity of the problem. 

Method of using cooling water defined (open recirculated, salt water, double exchange, ponds, air cooling) ... 

---