Contact stiffness mechanical properties

We have recently been exploring this technique to evaluate the adhesive and mechanical properties of compliant polymers in the form of a nanoscale JKR test. The force and stiffness data from a force-displacement curve can be plotted simultaneously (Fig. 13). For these contacts, the stiffness response appears to follow the true contact stiffness, and the curve was fit (see [70]) to a JKR model. Both the surface energy and modulus can be determined from the curve. Using JKR analyses, the maximum pull off force, surface energy and tip radius are... 

As discussed in Sect. 2.2.2, FMM images can lose the material contrast when the sample stiffness exceeds the stiffness of the cantilever. In addition, the net signal contains friction effects because of the cantilever bending and the sample indentation. Furthermore, in liquid samples, capillary forces dominate the response at low frequencies [ 127]. These drawbacks can be overcome by operating the microscope above the contact resonance frequencies. In the so-called con-tact-mode scanning local-acceleration microscope the cantilever oscillates at very low amplitudes of ca. 0.1 nm which still provides strong enough contrast with respect to the mechanical properties [122]. Since the response of the canti-... 

Polymer networks such as epoxies play an increasing role as adhesives in industry. Two properties are of special importance for their application (a) a strong adhesive bond is required between the solidified adhesive and the bonded object, which is often a metal (b) the mechanical stiffness of the adhesive has to be adapted to the desired level. As a consequence, the adhesive has to be selected according to its adhesion properties as well as its mechanical properties. Several studies have shown that both properties are linked as soon as the epoxy polymer layer is sufficiently thin the contact of the polymer with the substrate may induce in the polymer a broad interphase where the morphology is different from the bulk. Roche et al. indirectly deduced such interphases, for example from the dependence of the glass transition temperature on the thickness of the polymer bonded to a metal substrate [1]. Moreover, secondary-ion mass spectroscopy or Auger spectroscopy provided depth profiles of interphases in terms of chemical composition, which showed chemical variations at up to 1 pm distance from the substrate. 

---