Conradson carbon residue asphalt

Other test methods that are used for determining the coking value of tar and pitch (ASTM D-2416, ASTM D-4715), which indicates the relative coke-forming properties of tars and pitches, might also be applied to asphalt. Both test methods are applicable to tar and pitch with an ash content <0.5% (ASTM D-2415). The former test method (ASTM D-2416) gives results close to those obtained by the Conradson carbon residue test (ASTM D-189, IP 13). However, in the latter test method (ASTM D-4715), a sample is heated for a specified time at 550 10°C (1022 18°F) in an electric furnace. The percentage of residue is reported as the coking value. 

Vacuum distillation of the atmospheric residue complements primary distillation, enabli r.ecoyery of heavy distillate cuts from atmospheric residue that will un r o further conversion or will serve as lube oil bases. The vacuum residue containing most of the crude contaminants (metals, salts, sediments, sulfur, nitrogen, asphaltenes, Conradson carbon, etc.) is used in asphalt manufacture, for heavy fuel-oil, or for feed for others conversion processes. 

The carbon residue of a petroleum crude oil is proportional to the asphalt content, normally measured by Conradson Carbon ASTM D 189. In most cases the lower the carbon residue, the higher the value that can be placed on the crude oil. 

Likewise, the asphalt (A., wt %) in a residue may be estimated from the Conradson carbon (C., wt %), within plus or minus 10 per cent, from... 

---