Conjugated polymers electrolyte conductivity

Batteries. Many 7t-conjugated polymers can be reversibly oxidized or reduced. This has led to interest in these materials for charge-storage batteries, since polymers are lightweight compared to metallic electrodes and liquid electrolytes. Research on polymer batteries has focused on the use of polymers as both the electrode and electrolyte. Typical polymer electrolytes are formed from complexes between metal-ion salts and polar polymers such as poly(ethyleneoxide). The conductivity is low at room temperature due to the low mobility of cations through the polymer-matrix, and the batteries work more efficiendy when heated above the glass-transition temperature of the polymer. Advances in the development of polymer electrolytes have included polymers poly(ethylene oxide) intercalated into layered silicates (96). These solid-phase electrolytes exhibit significantly improved conductance at room temperature. 

Electrochemically stimulated conformational relaxation model (ESCR model) — This model [i, ii] describes the relaxation phenomena occurring during the charging and discharging of -> conducting polymers. It assumes that applying an anodic -> overpotential to a neutral conjugated polymer, as a first step, an expansion of the closed polymeric structure occurs. In this way, partial oxidation takes place and counter ions from the solution enter the solid polymer under the influence of an electrical field at those points of the polymer/electrolyte... 

Armand (1994) has briefly summarised the history of polymer electrolytes. A more extensive account can be found in Gray (1991). Wakihara and Yamamoto (1998) describe the development of lithium ion batteries. Sahimi (1994) discusses applications of percolation theory. Early work on conductive composites has been covered by Norman (1970). Subsequent edited volumes by Sichel (1982) and Bhattacharya (1986) deal with carbon- and metal-filled materials respectively. Donnet et al. (1993) cover the science and technology of carbon blacks including their use in composites. GuF (1996) presents a detailed account of conductive polymer composites up to the mid-1990s. Borsenberger and Weiss (1998) discuss semiconductive polymers with non-conjugated backbones in the context of xerography. Bassler (1983) reviews transport in these materials. 

Among the conjugated polymers, polypyrrole (PPy) is the most representative one for its easy polymerization and wide application in gas sensors, electrochromic devices and batteries. Polypyrrole can be produced in the form of powders, coatings, or films. It is intrinsically conductive, stable and can be quite easily produced also continuously. The preparation of polypyrrole by oxidation of pyrrole dates back to 1888 and by electrochemical polymerization to 1957. However, this organic p>-system attracted general interest and was foimd to be electrically conductive in 1963. Polypyrrole has a high mechanical and chemical stability and can be produced continuously as flexible film (thickness 80 mm trade name Lutamer, BASF) by electrochemical techniques. Conductive polypyrrole films are obtained directly by anodic polymerization of pyrrole in aqueous or organic electrolytes. 

Electrochemical deposition of conjugated polymers occurs easily, but the final properties are sensitive to the deposition conditions, including supporting electrolyte, temperature, electrical stimulus (galva-nostatic, potentiostatic, or potentiodynamic), and electrode material. MEMS developers need to be familiar with how deposition conditions affect film properties, such as conductivity. Young s modulus, and speed. Further details on the effects of electropolymerization conditions on the structure and properties of conducting polymers can be found elsewhere [9]. 

The reduction in size of conjugated polymer chemical sensors has been shown to lead significant performance improvements. In one example, Seeber and coworkers [23] compared the electrochemical detection of ascorbic acid with both 3 mm and 10 pm diameter platinum electrodes coated with polythiophene. The microelectrode was found to give lower detection limits and to operate in poorly conductive electrolytes, which are commonly encountered in practical applications. 

---