Condensation outside horizontal cylinders

Film-condensation coefficients outside horizontal cylinders. The analysis of Nusselt can also be extended to the practical case of condensation outside a horizontal tube. For a single tube the film starts out with zero thickness at the top of the tube and increases in thickness as it flows around to the bottom and then drips off. If there is a... 

Using an analysis similar to Nusselt s theory on filmwisc condensation presented in the next section, Bromley developed a theory for the prediction of heat flux for stable film boiling on the outside of a horizontal cylinder. The heat Ilux for film boiling on a horizontal cylinder or sphere of diameter D is given by... 

Evaporators, Horizontal-Tube Type - The basic horizontal-tube evaporator is illustrated in Figure 12. The body of this evaporator is the liquor compartment and is in the form of a vertical cylinder. It is closed, top and bottom, with dished heads, although the bottom may be conical. The lower body ring is provided on opposite sides with steam compartments, closed on the outside by cover plates and on the inside by tube sheets. Between these tube sheets are fastened a number of horizontal tubes. The two steam chests with their connecting mbes form the steam compartment, and the tube wall heating surface. Steam is introduced into one steam chest and as it flows through the tubes it washes non-condensed gases and condensate ahead of it, so that these are withdrawn from the opposite steam chest. 

---