Cobalt magnetic properties

Bucher J P, Douglass D C and Bloomfield L A 1991 Magnetic properties of free cobalt clusters Phys. Rev. Lett. 66 3052... 

Platinum-cobalt alloys have magnetic properties. One such alloy made of 76.7% Pt and 23.3%... 

Chromium—Cobalt—Iron Alloys. In 1971, a family of ductile Cr—Co—Fe permanent-magnet alloys was developed (79). The Cr—Co—Fe alloys are analogous to the Alnicos in metallurgical stmcture and in permanent magnetic properties, but are cold formable at room temperature. Equivalent magnetic properties also can be attained with substantially less Co, thereby offering savings in materials cost. 

Vanadium—Cobalt-Iron Alloys. V—Co—Fe permanent-magnet alloys also are ductile. A common commercial ahoy, Vicahoy I, has a nominal composition 10 wt % V, 52 wt % Co, and 38 wt % Fe (Table 10). Hard magnetic properties are developed by quenching from 1200°C for conversion to bcc a-phase foUowed by aging at 600°C (precipitation of fee y-phase). The resulting properties are isotropic, with ca kJ/m ... 

The physical description of strongly pressure dependent magnetic properties is the object of considerable study. Edwards and Bartel [74E01] have performed the more recent physical evaluation of strong pressure and composition dependence of magnetization in their work on cobalt and manganese substituted invars. Their work contrasts models based on a localized-electron model with a modified Zener model in which both localized- and itinerant-electron effects are incorporated in a unified model. Their work favors the latter model. 

Cobalt and Nickel.—The discussion of the magnetic properties of cobalt... 

Pure platinum is malleable and ductile with excellent corrosion resistance. When alloyed with cobalt, it has good magnetic properties (76.7 W% Pt, 23.3 W% Co). 

Under deposition of cobalt nanocrystals, self-assemblies of particles are observed and the nanocrystals are organized in a hexagonal network (Fig. 2). However, it can be seen that the grid is not totally covered. We do not have a simple explanation for such behavior. In fact, the size distribution, which is one of the major parameters in controlling monolayer formation, is similar to that observed with the other nanocrystals, such as silver and silver sulfide. One of the reasons could be that the nanocrystals have magnetic properties, but there is at present no evidence for such an assumption. 

For iron, cobalt, nickel, and their alloys, the most sensitive technique for characterizing the particle surface is the measurement of magnetic properties. Thus, we synthesized cobalt nanoparticles of 1.6 nm (ca. 150 atoms), 2 nm (ca. 300 atoms) and 4 nm (a few thousand atoms) mean size. The structure of the particles is hep in the latter case and polytetrahedral in the first two cases. The 4 nm particles display a saturation magnetization equal to that of bulk... 

The surface properties of these nano-objects match those of metal nano crystals prepared in ultrahigh vacuum, for example the C - O stretch of adsorbed carbon monoxide or the magnetic properties of cobalt particles embedded in PVP. This demonstrates the clean character of the surface of these particles and its availabihty for reactivity studies. 

In a different way, metallic-core nanoparticles [346-349] (prepared cf. Section 3.10) equipped with biocompatible coats such as L-cysteine or dextrane may be exploited for highly efficient and cell-specific cancer cell targeting, i.e., for improving diagnosis and therapy of human cancer. In a recent proof-of-principle experiment an unexpectedly low toxicity of the L-cysteine-covered cobalt nanoparticles was demonstrated [433] For diagnostic purposes, it is expected to use the advantageous magnetic properties of the metallic-core nanoparticles to obtain a contrast medium for MRI with considerably increased sensitivity, capable to detect micro-metastases in the environment of healthy tissues [434 37]. 

M Since the discovery of the magnetic properties of the cobalt alloy, samarium has been the "superstar" of the lanthanides. Music fans have their ears covered with samarium in the form of modem earphones... 

Study of Magnetic Properties of Mixed Cobalt-Zinc Ferrites Synthesized By Solid State Reaction Technique. 

The spinel ferrites were fabricated by solid state reaction technique. Cobalt and Zinc ferrites CoxZnyFe204,(x=0.7,0.3,0.4,0.2 and y=0.3,0.7,0.6,0.8) were prepared by solid state reaction technique. The crystalline structure of the sample was investigated by X-ray diffraction(XRD). All samples show cubic spinel structure. The lattice parameter decreases with increasing cobalt content. Magnetic properties shows that the prepared sample exhibit ferromagnetic behaviour at room temperature. The saturation magnetization increases with increasing cobalt content. Curie temperature... 

---