Co-solvent addition

Supercritical carbon dioxide with a minute co-solvent addition is an effective medium for the 1,3-dipolar cycloaddition of azomethine ylides with DMAD to produce substituted pyrroles.67 The 1,3-dipolar cycloaddition of nitrile ylides [e.g. benzonitrile (4-nitrobenzylide) and 4-nitrobenzonitrile(benzylide)] with acrylamides provided a synthesis of 3,4-dihydro-2//-pyrroles with moderate to good yields.68 The Pt(II)-or Au(III)-catalysed 3 + 2-cycloaddition of the transition metal-containing azomethine ylide (63) with electron-rich alkenes provided a carbene complex (64), which yields tricyclic indoles (65) having a substituent at 3-position (Scheme 17).69 The 1,3-dipolar cycloadditions of azomethine ylides with aryl vinyl sulfones are catalysed by Cu(MeCN)4C104-Taniaphos with nearly complete exo- selectivity and enantioselec-tivities up to 85% ee.10 The 3 + 2-cycloaddition of benzol/>]thiophene 1,1-dioxide... 

As regards the end-of-run isomerization rates, whereas the experimental results show a maximum at roughly 50 mol% co-solvent, the simulated results show a continuous decrease in isomerization rate with co-solvent addition. This might suggest a higher extent of coke extraction with the n-pentane co-solvent relative to that predicted for hexene. Such solvent effects have been reported previously [11]. The model does not account for solvent type and is hence unable to predict co-solvent effect on the solubility of coke precursors. 

In the case of Ti precursor electrospinning, the need to understand the chemistry of the sol-gel process in order to control electrospinning process was discussed by Skotak and coworkers [144,145]. They deeply analyzed a sol of Ti alkoxide, acetic acid, and PVP and monitored sol properties as a function of time. They investigated the effect of acetic acid and PVP concentration, type of Ti precursor, co-solvent addition, and type of chemical species on sol properties and stability in view of fabricating fibers with a controllable and reproducible diameter. 

A solvent additive for OPV can be either a good solvent, selective solvent, or a nonsolvent for both species. The solvent additive must have a higher BP than the carrier solvent so that as the carrier solvent evaporates off, the co-solvent additive concentration increases. This means that the wet film thickness and concentration is created with the main solvent, but the morphology forms under the thermodynamic... 

The checkers distilled the anisole from calcium sulfate before use. This reagent functions not only as a reactant, but also as solvent. In some similar preparations the intermediate trichloride is rather insoluble, as in the case of bis(3-methyl-4-methoxyphenyl)tellurium dichloride. The addition of co-solvents such as bis-(2-methoxyethyl) ether is beneficial. ... 

In an extension of this work Scheeren et al. studied a series of derivatives of N-to-syl-oxazaborolidinones as catalysts for the 1,3-dipolar cycloaddition reaction of 1 with 2b [29]. The addition of a co-solvent appeared to be of major importance. Catalyst 3b was synthesized from the corresponding amino acid and BH3-THF, hence, THF was present as a co-solvent. In this reaction (-)-4b was obtained with 62% ee. If the catalyst instead was synthesized from the amino acid and... 

The addition of co-solvents to ionic liquids can result in dramatic reductions in the viscosity without alteration of the cations or anions in the system. The haloaluminate ionic liquids present a challenge, due to the reactivity of the ionic liquid. Nonetheless, several compatible co-solvents including benzene, dichloromethane, and acetonitrile have been investigated [33-37]. The addition of as little as 5 wt. % acetonitrile or 15 wt. % benzene or methylene chloride was able to reduce the... 

The physical properties of ionic liquids can often be considerably improved through the judicious addition of co-solvents [55-58]. Flowever, surprisingly, this approach has been relatively underutilized. Flussey and co-workers investigated the effect of co-solvents on the physical properties of [EMIM]C1/A1C13 ionic liquids [55, 56]. They found significant increases in ionic conductivity upon the addition of a variety of co-solvents. Figure 3.6-5 displays representative data from this work. The magnitude of the conductivity increase depends both on the type and amount of the co-solvent [55, 56]. 

Addition of co-solvents can also change the co-miscibility characteristics of ionic liquids. As an example, the hydrophobic [BMIM][PFg] salt can be completely dissolved in an aqueous ethanol mixture containing between 0.5 and 0.9 mole fraction of ethanol, whereas the ionic liquid itself is only partially miscible with pure water or pure ethanol [13]. The mixing of different salts can also result in systems with modified properties (e.g., conductivity, melting point). 

A co-solvent that is poorly miscible with ionic liquids but highly miscible with the products can be added in the separation step (after the reaction) to facilitate the product separation. The Pd-mediated FFeck coupling of aryl halides or benzoic anhydride with alkenes, for example, can be performed in [BMIM][PFg], the products being extracted with cyclohexane. In this case, water can also be used as an extraction solvent, to remove the salt by-products formed in the reaction [18]. From a practical point of view, the addition of a co-solvent can result in cross-contamination, and it has to be separated from the products in a supplementary step (distillation). More interestingly, unreacted organic reactants themselves (if they have nonpolar character) can be recycled to the separation step and can be used as the extractant co-solvent. 

The specificity of enzyme reactions can be altered by varying the solvent system. For example, the addition of water-miscible organic co-solvents may improve the selectivity of hydrolase enzymes. Medium engineering is also important for synthetic reactions performed in pure organic solvents. In such cases, the selectivity of the reaction may depend on the organic solvent used. In non-aqueous solvents, hydrolytic enzymes catalyse the reverse reaction, ie the synthesis of esters and amides. The problem here is the low activity (catalytic power) of many hydrolases in organic solvents, and the unpredictable effects of the amount of water and type of solvent on the rate and selectivity. 

The nucleophilic addition of Grignard reagents to a-epoxy ketones 44 proceeds with remarkably high diastereoselectivity70. The chelation-controlled reaction products are obtained in ratios >99 1 when tetrahydrofuran or tetrahydrofuran/hexamethylphosphoric triamide is used as reaction solvent. The increased diastereoselectivity in the presence of hexamethylphos-phoric triamide is unusual as it is known from addition reactions to a-alkoxy aldehydes that co-solvents with chelating ability compete with the substrate for the nucleophile counterion, thus reducing the proportion of the chelation-controlled reaction product (vide infra). 

Supercritical fluid extraction — During the past two decades, important progress was registered in the extraction of bioactive phytochemicals from plant or food matrices. Most of the work in this area focused on non-polar compounds (terpenoid flavors, hydrocarbons, carotenes) where a supercritical (SFE) method with CO2 offered high extraction efficiencies. Co-solvent systems combining CO2 with one or more modifiers extended the utility of the SFE-CO2 system to polar and even ionic compounds, e.g., supercritical water to extract polar compounds. This last technique claims the additional advantage of combining extraction and destruction of contaminants via the supercritical water oxidation process."... 

---