Chromatographic processes chromatography

There are two fundamental chromatography theories that deal with solute retention and solute dispersion and these are the Plate Theory and the Rate Theory, respectively. It is essential to be familiar with both these theories in order to understand the chromatographic process, the function of the column, and column design. The first effective theory to be developed was the plate theory, which revealed those factors that controlled chromatographic retention and allowed the... 

Multidimensional gas chromatography has also been used in the qualitative analysis of contaminated environmental extracts by using spectral detection techniques Such as infrared (IR) spectroscopy and mass spectrometry (MS) (20). These techniques produce the most reliable identification only when they are dealing with pure substances this means that the chromatographic process should avoid overlapping of the peaks. 

At the current time, there is considerable interest in the preparative applications of liquid chromatography. In order to enhance the chromatographic process, attention is now focused on the choice of the operating mode [22]. SMB offers an alternative to classical processes (batch elution chromatography) in order to minimize solvent consumption and to maximize productivity where expensive stationary phases are used. 

In order to reduce the time-consuming open-column chromatographic processes, conventional methods of hydrocarbon-group-type separation have been replaced by MPLC and HPLC. Flash column chromatography is a technique less commonly applied than open-column version, but several applications have been described [2,24—27]. The common technique version is to use a silica-gel-filled column for example, 230 to 400 mesh 20 X 1 cm column size with a back pressure of 1.5 X 10 Pa of an ambient gas such as nitrogen. Solvents are similar to the ones apphed in the case of open-column chromatography fractionations. 

HPLC as a purification technique and as a tool for process monitoring has become increasingly attractive and will find many new applications in the future. Low pressure LC, probe LC, and micro-LC are techniques important to the future of process chromatography. Specialized detectors and multidimensional chromatographic approaches are also of increasing use. Additional literature is available.22 33-36... 

Principles and Characteristics High-performance thin-layer chromatography (HPTLC), also known as planar chromatography, is an analytical technique with separation power and reproducibility superior to conventional TLC, which was first used in 1938 [7] and modified in 1958 [8]. HPTLC is based on the use of precoated TLC plates with small particle sizes (3-5 xm) and precise instruments for each step of the chromatographic process. 

Ruthven, D.M. and Ching, C.B. (1993) Modeling of chromatographic processes. Preparative and production scale chromatography. In Chromatographic Science Series, Vol. 61. Eds. Ganetos, G., Barker,... 

At present, the purification by chromatographic processes is the most powerful high-resolution bioseparation technique for many different products from the laboratory to the industrial scale. In this context, continuous simulated moving bed (SMB) systems are of increasing interest for the purification of pharmaceuticals or specialty chemicals (racemic mixtures, proteins, organic acids, etc.).This is particularly due to the typical advantages of SMB-systems, such as reduction of solvent consumption, increase in productivity and purity obtained as well as in investment costs in comparison to conventional batch elution chromatography [1]. 

Developing an isolation approach is an activity that is frequently overlooked or addressed as an afterthought. However, solubility and stability data may dictate the development of a chromatographic method that requires the elaboration of the isolation, that is, it is more complicated than a simple evaporation of the mobile phase. The development of the chromatographic process should be linked to and interactively codeveloped with the isolation. Ideally, the isolated impurity sample should not contain other compounds or artifacts, such as solvents, mobile-phase additives or particulate matter from the preparative chromatography, as they may interfere with the structure elucidation effort or adversely affect the stability of the impurity during the isolation process. Therefore, it is preferable to avoid or minimize the use of mobile-phase additives. However, should this prove to be impossible, the additive used should be easy to remove. The judicious choice of mobile phase in the HPLC process increases the ability to recover the compound of interest without or with minimum degradation. The most common... 

---