Chlorine dioxide solubility properties

PTHF elastomers have a zigzag planar conformation. Some of typical physical properties are Tm = 43° C, Tg = - 86° C, density approximately 1. Other properties are comparable to those of usual rubbers. PTHF elastomers are soluble in many solvents (THF, aromatic and chlorinated hydrocarbons, esters, ketones, liquid sulfur dioxide, etc.). Aliphatic hydrocarbons in general are nonsolvents. 

The use of supercritical fluid extraction (SEE) as an extraction technique is related to the unique properties of the supercritical fluid. These fluids have a low viscosity, high diffusion coefficients, low toxicity, and low flammability, all clearly superior to the organic solvents used in SPE extraction. The most common fluid used is carbon dioxide. SEE extractions of sediment samples have shown recoveries of >95% for all the individual PCBs. The separation of PCDDs from PCBs and chlorinated benzenes is difficult because of their similar solubility. An interesting development is the use of fat retainers. Samples, mixed in different weight ratios with, e.g., silica/silver nitrate 10% or basic alumina, can be placed in 7 ml extraction cells. The analytes are recovered by elution with 1.5-1.8 ml of hexane. With the correct fat-silica ratios and SEE conditions, no additional cleanup procedure is necessary for GC with an electron-capture detector (ECD). One drawback of SEE may be that the methods developed are valid for a specific matrix, but as soon as, e.g., the fat content of a biota sample or the type of lipids changes, the method has to be adapted. SEE is relatively complicated compared to other extraction techniques. In addition, the cell volumes are small, which limits the sample intake, and, with that, the detection limits. Einally, some reliable types of SEE equipment have recently been withdrawn from the market. This will have a substantial negative effect on the use of SEE in the near future. 

---