Chloride electronegativity

The strongly electronegative (p. 49) chlorine atom becomes a chloride ion, the proton accepting the electron pair donated by the nitrogen atom. A similar reaction occurs when ammonia is passed into water, but to a much lesser extent as oxygen in water is a poorer donor of the electron pair ... 

Compare the dipole moments of cyanogen bromide (BrC=N) and cyanogen chloride (C1C=N) Which IS larger" Why" What does this tell you about the electronegativity of the CN group" ... 

Another trend which can be anticipated from electronegativity data, is drat the bromides will be more easily decomposed thermally than the chlorides, and the iodides more readily than the bromides. A typical comparison is between the compounds of titanium and those of hafnium, which play a significant role in vapour deposition. 

The reactivity of mercury salts is a fimction of both the solvent and the counterion in the mercury salt. Mercuric chloride, for example, is unreactive, and mercuric acetate is usually used. When higher reactivity is required, salts of electronegatively substituted carboxylic acids such as mercuric trifiuoroacetate can be used. Mercuric nitrate and mercuric perchlorate are also highly reactive. Soft anions reduce the reactivity of the Hg " son by coordination, which reduces the electrophilicity of the cation. The harder oxygen anions leave the mercuric ion in a more reactive state. Organomercury compounds have a number of valuable synthetic applications, and these will be discussed in Chapter 8 of Part B. 

Iodide ions reduce Cu to Cu , and attempts to prepare copper(ll) iodide therefore result in the formation of Cul. (In a quite analogous way attempts to prepare copper(ll) cyanide yield CuCN instead.) In fact it is the electronegative fluorine which fails to form a salt with copper(l), the other 3 halides being white insoluble compounds precipitated from aqueous solutions by the reduction of the Cu halide. By contrast, silver(l) provides (for the only time in this triad) 4 well-characterized halides. All except Agl have the rock-salt structure (p. 242). Increasing covalency from chloride to iodide is reflected in the deepening colour white yellow, as the... 

Two types of chemical bonds, ionic and covalent, are found in chemical compounds. An ionic bond results from the transfer of valence electrons from the atom of an electropositive element (M) to the atom(s) of an electronegative element (X). It is due to coulombic (electrostatic) attraction between the oppositely charged ions, M (cation) and X (anion). Such ionic bonds are typical of the stable salts formed by combination of the metallic elements (Na, K, Li, Mg, etc.) with the nonmetallic elements (F, Cl, Br, etc.). As an example, the formation of the magnesium chloride molecule from its elemental atoms is shown by the following sequence ... 

Electronically, we find that strongly polarized acyl compounds react more readily than less polar ones. Thus, acid chlorides are the most reactive because the electronegative chlorine atom withdraws electrons from the carbonyl carbon, whereas amides are the least reactive. Although subtle, electrostatic potential maps of various carboxylic add derivatives indicate the differences by the relative blueness on the C-O carbons. Acyl phosphates are hard to place on this scale because they are not used in the laboratory, but in biological systems they appear to be somewhat more reactive than thioesters. 

The solvent can also affect regioselectivity. Consider O- vs C-alkylation of phenoxide ion with allyl chloride or bromide. In water, with allyl chloride the O- to C-alkylation ratio is 49 41 with phenol as a solvent it is 22 78 with methanol, dimethylformamide, and dioxane 100% O-alkylation is achieved. The selective solvation of the more electronegative O by the more protic solvents perhaps leads to some C-alkylations. 

The best yields are obtained when the ketene has an electronegative substituent, such as halogen. Simple ketenes are not very stable and must usually be generated in situ. The most common method for generating ketenes for synthesis is by dehydrohalo-genation of acyl chlorides. This is usually done with an amine such as triethylamine.167 Other activated carboxylic acid derivatives, such as acyloxypyridinium ions, have also been used as ketene precursors.168 Ketene itself and certain alkyl derivatives can be generated by pyrolysis of carboxylic anhydrides.169... 

The metallic impurities present in an impure metal can be broadly divided into two groups those nobler (less electronegative) and those less noble or baser (more electronegative) as compared to the metal to be purified. Purification with respect to these two classes of impurities occurs due to the chemical and the electrochemical reactions that take place at the anode and at the cathode. At the anode, the impurities which are baser than the metal to be purified would go into solution by chemical displacement and by electrochemical reactions whereas the nobler impurities would remain behind as sludges. At the cathode, the baser impurities would not get electrolytically deposited because of the unfavorable electrode potential and the concentration of these impurities would build up in the electrolyte. If, however, the baser impurities enter the cell via the electrolyte or from the construction materials of the cell, there would be no accumulation or build up because these would readily co-deposit at the cathode and contaminate the metal. It is for this reason that it is extremely important to select the electrolyte and the construction materials of the cell carefully. In actual practice, some of the baser impurities do get transferred to the cathode due to chemical reactions. As an example, let the case of the electrorefining of vanadium in a molten electrolyte composed of sodium chloride-potassium chloride-vanadium dichloride be considered. Aluminum and iron are typically considered as baser and nobler impurities in the metal. When the impure metal is brought into contact with the molten electrolyte, the following reaction occurs... 

---