Charcoal Norit from Birch

On the whole it is better to employ the activated decolourising charcoal prepared from wood. Excellent decolourising carbons are marketed under the trade names Norit (from birch wood), Darco and Nuchar. ... 

Charcoal is generally satisfactorily activated by heating gently to red heat in a crucible or quartz beaker in a muffle furnace, finally allowing to cool under an inert atmosphere in a desiccator. Good commercial activated charcoal is made from wood, e.g. Norit (from Birch wood), Darco and Nuchar. If the cost is important then the cheaper animal charcoal (bone charcoal) can be used. However, this charcoal contains calcium phosphate and other calcium salts and cannot be used with acidic materials. In this case the charcoal is boiled with dilute hydrochloric acid (1 1 by volume) for 2-3h, diluted with distilled water and filtered through a fine grade paper on a Buchner flask, washed with distilled water until the filtrate is almost neutral, and dried first in air then in a vacuum, and activated as above. To improve the porosity, charcoal columns are usually prepared in admixture with diatomaceous earth. 

---