Centrifuge equipment clarification

Steady-state control of a continuously fed extraction column requires maintenance of the location of the liquid-liquid interface at one end of the column. The main interface will appear at the top of the column when the light phase is dispersed and at the bottom of the column when the heavy phase is dispersed. If needed, extraction columns can be designed with an expanded-diameter settling zone to facilitate liquid-liquid phase separation by reducing liquid velocities. If sufficient clarification of the phases cannot be achieved, then it may be necessary to add an external device such as a gravity decanter or centrifuge. (See Liquid-Liquid Phase Separation Equipment. ) Sometimes a column is built with expanded ends at... 

Screening Equipment Filtration Cake Filters Centrifugal Filters Principles of Cake Filtration Clarifying Filters Liquid Clarification Gas Cleaning Principles of Clarification Crossflow Filtration Types of Membranes Permeate Flux for Ultrafiltration Concentration Polarization Partial Rejection of Solutes Microfiltration... 

High-speed centrifuges are of two types (1) the Sharpies type, which employs a long hollow bowl of small diameter and is rotated at a very high speed, and (2) the DeLaval type, employing a short disk bowl of large diameter. Such equipment is used largely for clarification and for separation of immiscible liquids. 

Sedimentation is the separation of suspended solid particles from a fluid stream by the action of a body force on the settling behavior of the particle. The body force may be either gravitational or centrifugal force. This section covers gravity sedimentation, represented by clarification and thickening. The equipment used for these two operations are called clarifiers and thickeners, respectively. Centrifugal sedimentation will be discussed in the next section. 

---