Centrifugal casting centrifuge

Centrifugal atomizer Centrifugal casting Centrifugal cleaners Centrifugal compressors... 

Centrifugal casting is used to produce water softener tanks and pipe by saturating a reinforcement with thermosetting resin within a mold that is then rotated at high speed to consoHdate the laminate before curing. 

Coppers and high copper aEoys can be successhEly cast using the centrifugal, continuous, investment, permanent, plaster, and sand molding methods. 

Properties of red brass alloys are given in Table 9. The members of this group are cast using the centrifugal, continuous, investment, and sand molding methods. General tensile strengths vary from 170 to 210 MPa (25,000—30,000 psi) minimum as cast in sand molds. 

Properties of copper—nickel alloys are Hsted in Table 14. The alloys in the copper—nickel group have been successfully cast using the centrifugal, investment, permanent, and sand molding methods. The minimum tensile strengths on test bars cast in sand molds are 207—310 MPa (30,000—45,000 psi). 

In different forms (bar, casting such as sand, centrifugal, die, pernianenl mould, etc., extrusion, forging, impact extrusion, pressing, sintered, powder pressing)... 

Centrifugal casting Process in which tubular products are fabricated through the application of resin and glass strand reinforcement to the inside of a mold that is rotated and heated. The process polymerizes the resin system. 

The Automatic processes are those such as pultrusion, filament winding, centrifugal casting and injection moulding. 

---