Carbon fibers nickel coated

Besfight MC and HTA-CF - carbon fiber nickel-coated with excellent mechanical properties of carbon fiber and good electric conductivity of nickel. The material for conductive plastics. 

Amitel TPEs are based on polyether ester or polyester ester, including specialty compounds as well as standard grades. Specialty grades are classified as (1) flame-retardant UL 94 V/0 0.031 in (0.79 mm), (2) high modulus glass-reinforced, (3) internally lubricated with polytefrafluoro ethylene (PTFE) or silicone for improved wear resistance, and (4) conductive, compounded with carbon black, carbon fibers, nickel-coated fibers, stainless-steel fibers, for ESD applications. 

Typical fillers calcium carbonate, glass fiber, carbon fiber, zinc borate, PTFE, aluminum flake, graphite fiber, nickel coated graphite fiber... 

In the course of their studies, Chung and her colleagues evaluated the effectiveness of aluminum flakes, coated and uncoated carbon fibers, nickel fibers, stainless steel fibers, combinations of flakes and fibers, and low melting-point metal alloys. 

J. A. E. BeU and G. Hansen, "Properties of Nickel-Coated Carbon and Kevlar Fibers Produced by the Decomposition of Nickel Carbonyl," the 23rddntemational SAMPE Technical Conference, Anaheim, Calif, Society for the Advancement of Material and Process Engineering, Covina, Calif., Oct. 1991. 

Names nickel coated carbon fiber, steel fiber, powder, silver coated hollow and solid glass spheres, silver coated mica, silver coated fiber... 

Chemical composition variable composition silver coatings in Conduct-O-Fil solid glass spheres and fibers -4-16 wt%, 30% on hollow glass spheres, 65 wt% on mica flakes, 8-19 wt% on copper flakes, 24 wt% on nickel granules, 20 wt% on aluminum particles, nickel coating on Compmat carbon fiber is 24 wt%... 

Aspect ratio 15 (silver-coated nickel flakes), 200-1600 (Compmat nickel coated carbon fibers)... 

VaporFab - nickel coated carbon fiber by a chemical vapor deposition process for EMI shielding applications... 

Incoshield - concentrates of nickel-coated carbon fiber in PPS, PC, PMMA, PEI, PA-6, PA-12. Concentrates are used for production of conductive polymers IB Company, Franklin, NJ, USA... 

Figure 2.38. SEM micrograph of nickel coated carbon fiber (left - Besfight, Toho Rayon, Co.) (right -Compmat, Composite Materials). Courtesy of Toho Rayon, Co., Tokyo, Japan and Composite Materials, L.L.C, Mamaroneck, NY, USA.

X-ray radiography of nickel-coated fibers, surface atoms of hydroxyapatite, coating analysis of silane treated hydroxyapatite, and composition of the failure area of an adhesive joint between rubber and metal. This review of applications shows that carbon fibers are the most frequently tested material by XPS. 

Figure 15.2. Shielding effectiveness of nickel-coated carbon fiber in ABS depending on method of mixing. [Adapted, by permission. I om Guanghong Lu, Xiaotian Li, Hancheng Jiang, Composites Sci. Technol., 56, No.2, 1996,193-200.]...

Typical fillers glass fiber, carbon fiber, aramid, antimony trioxide, zinc borate, stainless steel fiber, graphite, nickel coated graphite, aluminum flakes, metallized glass... 

LNP Corporation offers conductive plastics with fillers such as aluminum flakes, nickel-coated fibers, stainless steel fibers, and carbon fibers in a range of engineering polymers including nylon-6,6, polycarbonate, ABS, PPS, and PEEK. The company s 40% flake-filled polycarbonate is used for microprocessor covers in mainframe computers and nickel coated fiber-filled PEEK for avionic enclosures. 

---