Carbon epoxy thermoplastic matrix system

Thus, substrates such as aluminium and its alloys, alloys of titanium, low- and high-carbon steels, nickel, copper, fibre-reinforced plastics (containing both thermoplastic and thermosetting matrices - in the latter case, the matrix might well also be a formnlated epoxy-based system), glass, concrete and wood are all encountered. This means that they can be, and indeed are, widely used in construction, aerospace, automotive (both original equipment and aftermarket), electrical and electronics, furnimre, foundry, consumer and abrasives applications. 

Eiber lengths between 5 and 10 mm are conveniently selected for the microindentation test (111). Eor a carbon fiber/epoxy system, as the fiber volume fraction increases from 10 to 50 vol%, the indentation displacement distance decreases from 44 to 36 pm but the interfacial shear strength increases from 33 to 46 MPa. When the interphase-to-matrix modulus ratio increases from 1.0 to 7.5, the interfacial shear stress increases by only 10%. Likewise, the interphase thickness and fiber diameter have marginal effects on the interfacial shear stress. Three types of thermoplastic polymers (polyester, polyamide, and polypropylene) were tested for their interfacial shear strength to the glass fiber by Desaeger and... 

---