Calcium carbonate Subject

Sa.tura.tion Index. Materials of constmction used in pools are subject to the corrosive effects of water, eg, iron and copper equipment can corrode whereas concrete and plaster can undergo dissolution, ie, etching. The corrosion rate of metallic surfaces has been shown to be a function of the concentrations of Cl ,, dissolved O2, alkalinity, and Ca hardness as well as buffer intensity, time, and the calcium carbonate saturation index (35). 

Food and pharmaceutical grades of calcium carbonate are covered by the Food Chemicals Codex (7) and the United States Pharmacopeia (8) and subject to U.S. Food and Dmg Administration Good Manufacturing Practices (9). Both purity requirements and test methods are available (7,8). Calcium carbonate is listed in the U.S. Code of Federal Regulation as a food additive, and is authorized for use in both paper and plastic food contact appHcations. 

After the pH was adjusted, 5 g of calcium carbonate was added. This inoculum medium was then subjected to heat sterilization. The medium was then cooled and 2 ml of a spore sus-... 

Polyphosphate, often with sodium chloride. This is a very low-tech approach, relying primarily on the threshold mechanism of polyphosphate to prevent calcium carbonate deposition at the membrane-water interface. Products based on this simple technology are subject to many limitations and probably are inappropriate to most industrial RO situations. 

Common pollutants in a titanium dioxide plant include heavy metals, titanium dioxide, sulfur trioxide, sulfur dioxide, sodium sulfate, sulfuric acid, and unreacted iron. Most of the metals are removed by alkaline precipitation as metallic hydroxides, carbonates, and sulfides. The resulting solution is subjected to flotation, settling, filtration, and centrifugation to treat the wastewater to acceptable standards. In the sulfate process, the wastewater is sent to the treatment pond, where most of the heavy metals are precipitated. The precipitate is washed and filtered to produce pure gypsum crystals. All other streams of wastewater are treated in similar ponds with calcium sulfate before being neutralized with calcium carbonate in a reactor. The effluent from the reactor is sent to clarifiers and the solid in the underflow is filtered and concentrated. The clarifier overflow is mixed with other process wastewaters and is then neutralized before discharge. 

In contrast to calcium carbonate, all seawater is undersaturated with respect to BSi. As shown in Table 16.1, the imdersaturation is very large and increases with depth because the solubility of BSi increases with pressure. Thus, all siliceous hard parts are subject to dissolution. Nevertheless, about 25% of the BSi created in the surfece waters survives the trip to the seafloor via pelagic sedimentation. Direct observations of this transport... 

Bodies of Water and the Chemical Sediments ,— The chemistry of the deposition of salts from sea-water has already been made the subject of special research, and van t Hoff s results in this field are already familiar. The deposition of calcium carbonate awaits a similar thorough study. Allied questions are the formation of dolomite, the deposition of various salts from inclosed bodies of water, the deposition of phosphate rocks, the precipitation of colloidal suspensions of clay and other substances, and the origin of the great deposits of sedimentary iron ore. 

A sample of a standard calcium carbonate slurry was received from a large manufacturer in the USA. This sample was subjected to preservative efficacy testing according to the ASTM E 723-91 test protocol. Preservative treated samples were inoculated with a mixed bacterial inoculum containing organisms with a known tolerance or resistance to BIT (l,2-Benzisothiazolin-3-one). Untreated controls were included for reference purposes. The test procedure is outlined below. 

If the product is the subject of an NDA or an ANDA, a supplemental NDA must be filed [21CFR314.70(b)(2)]. It must be shown that the change does not affect the bioavailability of the active ingredient(s). CMC information for drug substances used in over-the-counter (OTC) products covered by an OTC monograph (e.g., calcium carbonate) are not reviewed. Therefore, a DMF need not be filed. The fact that there are existing DMFs for calcium carbonate does not mean that they are reviewed. CMC information for OTC products not covered by an OTC monograph (e.g., famotidine) does need to be reviewed. A DMF is an appropriate mechanism to submit such information. 

The Stassfurt deposits have been the subject of elaborate investigations by J. H. van t Hoff and his school.16 In 1849, J. Usiglio 17 studied the deposition of salts when sea.water is cone, by evaporation, and examined the residues analytically. He found that calcium carbonate was first eliminated, then calcium sulphate, then sodium chloride, and the more soluble salts accumulated in the mother liquid. This method of investigation does not allow sufficient time for the various salts to attain a state of equilibrium, and it therefore follows that the natural evaporation of brines probably furnishes somewhat different results. Moreover, it is difficult, if not impossible, to identify the several substances which separate from the mother liquid formed during the later stages of the evaporation. J. H. van t Hoff followed the synthetic method in his study of this subject. He started from simple soln. like those of sodium and potassium chlorides, under definite conditions of temp., and gradually added the pertinent constituents until the subject became so complicated that the crystallization of the constituents from concentrating sea water was reduced to a special case of a far more comprehensive work. 

A pulverized rock sample believed to be pure calcium carbonate is subjected to chemical analysis and found to contain 51.3% Ca, 7.7% C, and 41.0% O by mass. Why can t this rock sample be pure CaC03 ... 

Marble is a metamorphic rock made of calcium carbonate. It is formed when limestone is subjected to high pressures or high temperatures, or sometimes both acting together, to create crystals of calcium carbonate in the rock. 

For decades such adsorption had been assumed to involve dipole interactions and interacting sites were termed "polar." It is quite clear in the above studies that dipoles in the polymers and in the solid surfaces do not contribute measurably to adsorption. Even from carbon tetrachloride, the solvent most favorable to adsorption, the amount of basic polymer (PMMA) that adsorbed onto basic calcium carbonate was only 2.5% of the amount that adsorbed on the same area of silica surface. Similarly, the amount of acidic polymer (CPVC) that adsorbed onto the acidic silica from any of the six solvents was less than 0.2% of the amount that adsorbed from carbon tetrachloride or dichloromethane onto the same area of basic calcium carbonate. It is concluded that adsorption of organic acids or bases from neutral organic solvents onto inorganic solids is governed entirely by acid-base interactions and is quite independent of dipole phenomena. It is therefore proposed that heats of adsorption are actually enthalpies of acid-base interaction and should therefore be subject to the Drago correlation ... 

Therapy for this patient consisted of a daily supplement of elemental calcium (1000 mg) in the form of calcium carbonate. Because of the elevated concentration of 1,25-dihydroxyvitamin D and the normal concentration of 25-hydroxyvitamin D, vitamin D supplements were not prescribed for this child. The subject of this case report responded well to calcium supplementation. After 3 months of supplementation,... 

---