Terminal post burning

Cell connectors and terminal post bnrning must be done in such a manner that there is complete fnsion of the post strap top and the cover lead bushing with the connector ring or terminal post. The terminal burning machine places the battery nnder the... 

FIGURE 7.30 Terminal post burning machine. (From Wirtz Manufacturing. Available at http //www.wirtzusa.com G. Mayer, US Patent Application, US 2006/0093912 Al, 2006.)... 

Garg HG, Siebert JW, Garg A, Neame PJ. Inseparable iduronic acid-containing proteoglycan PG(IdoA) preparations of human skin and post-burn scar tissues evidence for elevated levels of PG(IdoA)-I in hypertrophic scar by N-terminal sequencing. Carbohydr Res 1996 284 223-228. 

When soldering wires to terminals, the lead outline must be visible and good wetting between the wire and terminal must be evident to be acceptable. The wire insulation gap can be near zero if the insulation has not melted into the solder joint. Slight melting of the insulation is acceptable. If the insulation gap is too large and allows potential shorting of wire to an electrically noncommon conductor, the joint is unacceptable. If the wire insulation is severely burned and the melt by-product intrudes into the solder joint, the joint is unacceptable For round post terminals, the contact of wrap must be 180° for Class 3 and 90° for Classes 1 and 2. Most of the other terminal types, such as pierced terminals, require 90° of wire wrap (see Fig. 52.33). 

---