Borohydride reduced platinum metals

The treatment of solutions of platinum metals with aqueous borohydride results in the formation of finely divided black precipitates that are active catalysts for alkene hydrogenations. The platinum black obtained in this way was twice as active as that obtained by the hydrogenation of platinum oxide. The borohydride reduced rhodium black is even more active. While the borohydride reduction of base metals gives the corresponding metal borides, there is little, if any, boron incorporated into these platinum metal blacks. Analysis of the borohydride reduced palladium found that while the palladium boron ratio in the bulk was 10 1, less than 1% of the surface was boron.59 7, 5 small amount of boron, however, can impart a significant difference in catalytic activity to this catalyst as compared with other, more common, palladium catalysts. The most striking difference is the inability of the borohydride reduced palladium to promote the hydrogenolysis of activated C-0 and C-N bonds, a reaction that takes place readily over standard palladium catalysts. 

Treatment of an aqueous solution of ruthenium chloride and staimous chloride with borohydride gave a precipitate of a ruthenium-tin-boride. The ruthenium is present as the metal and the boron as the boride with electron donation to the ruthenium. The tin exists as a mixture of tin(ll) and tin(IV) oxides which interact with the ruthenium through the oxygens. These catalysts are useful 

---

To use this variation, the following materials are placed in the 1.5 liter champagne bottle hydrogenation device described in Chapter 11 of Secrets of Methamphetamine Manufacture, Seventh Edition . 5 gram platinum in 20 ml distilled water. If this platinum is in the form of Pt02 instead of reduced platinum metal catalyst obtained with borohydride, the experimenter must now reduce the platinum by... 

In the present experiment the metal catalyst, platinum, is generated in situ by the reaction of chloroplatinic add with sodium borohydride. The reduced platinum metal is formed in a coUoidal suspension, which provides an enormous surface area, and therefore excellent conditions, for heterogeneous catalysis. The molecular hydrogen necessary for the reduction can also be conveniently generated in situ by the reaction of sodium borohydride with hydrochloric add ... 

Colloidal metals are usually prepared by reduction of a salt with a reducing agent, such as phosphorus, acetone, tannin, or carbon monoxide. Platinum metals can also be prepared as finely divided very active blacks by reducing the metal salt in an aqueous solution of sodium or potassium borohydride. 

Highly active nickel, platinum and palladium catalysts can also be prepared by reducing the metal salts with sodium borohydride. 

Common catalyst compositions contain oxides or ionic forms of platinum, nickel, copper, cobalt, or palladium which are often present as mixtures of more than one metal. Metal hydrides, such as lithium aluminum hydride [16853-85-3] or sodium borohydride [16940-66-2] can also be used to reduce aldehydes. Depending on additional functionahties that may be present in the aldehyde molecule, specialized reducing reagents such as trimethoxyalurninum hydride or alkylboranes (less reactive and more selective) may be used. Other less industrially significant reduction procedures such as the Clemmensen reduction or the modified Wolff-Kishner reduction exist as well. 

By reduction of aldehydes and ketones Aldehydes and ketones are reduced to the corresponding alcohols by addition of hydrogen in the presence of catalysts (catalytic hydrogenation). The usual catalyst is a finely divided metal such as platinum, palladium or nickel. It is also prepared by treating aldehydes and ketones with sodium borohydride (NaBH4) or lithium aluminium hydride (LLAIH4). Aldehydes yield primary alcohols whereas ketones give secondary alcohols. 

Alkyl chlorides are with a few exceptions not reduced by mild catalytic hydrogenation over platinum [502], rhodium [40] and nickel [63], even in the presence of alkali. Metal hydrides and complex hydrides are used more successfully various lithium aluminum hydrides [506, 507], lithium copper hydrides [501], sodium borohydride [504, 505], and especially different tin hydrides (stannanes) [503,508,509,510] are the reagents of choice for selective replacement of halogen in the presence of other functional groups. In some cases the reduction is stereoselective. Both cis- and rrunj-9-chlorodecaIin, on reductions with triphenylstannane or dibutylstannane, gave predominantly trani-decalin [509]. 

Monodisperse particles present the advantage of uniform active site distribution and can be considered as models for heterogeneous catalytic reactions. Monodisperse metals, metal oxides or metal borides can now be easily obtained using microemulsions, vesicles, polymers or normal micelles (refs. 1-4). Microemulsions were used to obtain monodisperse particles of platinum (refs. 5-7), palladium (refs. 5,6), rhodium (refs. 5,6), iridium (ref. 5) and gold (ref. 8) by reducing the precursor metal ions with hydrogen, hydrazine, sodium borohydride or solvated electrons. Monodisperse nickel boride (refs. 1,9-12), cobalt boride (refs. 1,10,13-17), nickel-cobalt boride (refs. 1,10,15-17), and mixtures of iron boride and iron oxides (refs. 1,18) were prepared by sodium borohydride reduction of the precursor metal ions. Iron oxides (ref. 19), magnetite (ref. 20), calcium carbonate (ref. 21) and silver chloride (ref. 22) were obtained by precipitation reactions. 

---