Blocking, corrosion

Corrosion inhibitors are used to protect both the container and the metal substrate being stripped. Acid activated removers use inhibitors to block corrosion on active metals. Typical inhibitors are propylene oxide [75-56-9], butylene oxide [9106-88-7], triethylammonium phosphates, and sodium ben2oate [532-32-1] (see Corrosion and corrosion control). [Pg.551]

PCA 4 (Belclene 500) is primarily a building-block corrosion inhibitor. It can be used to synergize with chromate, zinc, nitrite, phosphate, and silicate in order to lower the concentration of these traditional corrosion inhibitors in the cooling system. [Pg.160]

CaCOi scale inhibitor and building block-corrosion inhibitor for general duty... [Pg.167]

CaCOi scale inhibitor and building block-corrosion inhibitor, CI2 resistant PBTC Phosphonobutane tricarboxylic acid examples Bayhibit AM, Mayoquest 2100, Phos 9, Codex 551 CaCOi scale inhibitor and building block-corrosion inhibitor for high stress HPCA Hydroxyphosphonoacetic acid example Belcor 575... [Pg.167]

Zinc stabilizer and building block corrosion inhibitor, esp. in soft water AEC Alkyl epoxy carboxylate example Continuum AEC... [Pg.167]

Falex (Direct Scale) 2500 Lbs./50 In.-Lbs. Cast Iron Block Corrosion Test Pass Appearance Clear pH 9.6... [Pg.117]

Cast Iron Block Corrosion Test Pass... [Pg.117]

Big Chemical Encyclopedia