Azo compounds reduction

Aromatic Azo Compounds Reduction of aromatic azo compounds involves a four-electron process that proceeds through a short-lived intermediate, hydrazoben-zene, that ends with complete reductive cleavage of the azo hnkage and formation of aromatic amines. 

Further complications of the reduction of aromatic nitro compounds are the possibility of complete reduction to aromatic amines (which may condense with nitroso compounds to give the desired azo compounds), reduction of azo compounds to the corresponding hydrazo compounds, followed by a benzidine (or semidine) rearrangement. It is clear, therefore, that the level of reducing agent used and other reaction conditions are quite critical. 

Several chemical reducing agents are available for obtaining the azo compounds. An example is the synthesis of azobenzene by the action of zinc dust and alkali on nitrobenzene (86%). Lithium aluminum hydride in ether gives satisfactory results in the conversion of nitrobenzene and nitromesitylene to the azo compounds. Reduction by the action of hydrazine in alcohol solution over a palladium catalyst has been a successful procedure for converting the halonitrobenzenes to the azo compounds. ... 

Diimide, HN=NH. The reagent, generated in situ by cupric ion-catalyzed oxidation of hydrazine with oxygen (air), hydrogen peroxide, potassium ferricyanide, or mercuric oxide, reduces olefins, alkynes, and azo compounds. Reduction of the... 

Azo-compounds can be obtained by reduction of nitro-compounds, or by oxidation of hydrazo-compounds. They are usually prepared, however, by reacting a phenol or amine with a diazonium salt. The coupling usually takes place in the position para to the hydroxyl or amino group, but if this position is occupied it goes to the ortho position, e.g. 

The azo-compounds are usually very stable, and can be directly chlorinated, nitrated and sulphonated. On vigorous reduction the molecule splits at the azo group to give two molecules of primary amines, e.g. bcnzene-azophenol gives PhNH2 and p-HOC H NHa. 

The most noteworthy reaction of azo-compounds is their behaviour on reduction. Prolonged reduction first saturates the azo group, giving the hydrazo derivative (C NH-NH C), and then breaks the NH NH linkage, with the formation of two primary amine molecules. If method (1) has been employed to prepare the azo-compound, these two primary amines will therefore be respectively (a) the original amine from which the diazonium salt was prepared, and (6) the amino derivative of the amine or phenol with which the diazonium salt was coupled. For example, amino-azobenzene on complete reduction gives one equivalent of aniline, and one of p-phenylene diamine, NHaCeH NH benzene-azo-2-naphthoI similarly gives one equivalent of aniline and one of... 

Compounds containing two primary amino groups attached to a benzene ring can be prepared by the reduction of dinitro compounds and of nitroanilines, usually with tin or stannous chloride and hydrochloric acid or with iron and very dilute hydrochloric acid. / ara-diamines may also be obtained by the reduction of aromatic amino-azo compounds (e.g., p-aminodimethylanihne from methyl orange, see Section IV,78). p-Phenylenediamine may also be prepared from p-nitroacetanilide reduction with iron and acid yields p-amino-acetaniUde,.which may be hydrolysed to the diamine. 

Azo compounds may be identified by examination of the amine(s) formed on reduction in acid solution (see Sections IV,76 and IV,78) ... 

Dia ene deductions. Olefins, acetylenes, and azo-compounds are reduced by hydrazine in the presence of an oxidizing agent. Stereochemical studies of alkene and alkyne reductions suggest that hydrazine is partially oxidized to the transient diazene [3618-05-1] (diimide, diimine) (9) and that the cis-isomer of diazene is the actual hydrogenating agent, acting by a concerted attack on the unsaturated bond ... 

Although this reduction is more expensive than the Bnchamp reduction, it is used to manufacture aromatic amines which are too sensitive to be made by other methods. Such processes are used extensively where selectivity is required such as in the preparation of nitro amines from dinitro compounds, the reduction of nitrophenol and nitroanthraquinones, and the preparation of aminoazo compounds from the corresponding nitro derivatives. Amines are also formed under the conditions of the Zinin reduction from aromatic nitroso and azo compounds. 

Although distibenes, the antimony analogues of azo compounds, have never been isolated as free, monomeric molecules (130), a tungsten complex, tritungsten pentadecacarbonyl[p.2-Tj -diphenyldistibene] [82579-41-7] C2yH2Q025Sb2W2, has been prepared by the reductive dehalogenation of phenyldichlorostibine (131) ... 

The only practical method of preparing 1,4-aminonaphthol is from a-naphthol through an azo dye, the nitroso compound not being readily available. The majority of investigators have reduced technical Orange I with stannous chloride Mi.is.is.ir.is by the procedures discussed above, and benzeneazo-a-naphthol has been reduced by the same reagent. In order to make possible the use of crude, technical a-naphthol a method has been developed for the preparation of the benzeneazo compound, its separation from the isomeric dye coming from the d-naphthol present as well as from any disazo compound by extraction with alkali, and the reduction of the azo compound in alkaline solution with sodium hydrosulfite. The process, however, is tedious and yields an impure product. 

A general method for the preparation of azo compounds is reduction of azines to the hydrazine, followed by oxidation (12,33,128,132). Platinum... 

Atorvastatin, structure of, 105. 516 ATP (see Adenosine triphosphate) ATZ, see Anilinothiazolinone, 1031-1032 Aufbau principle. 6 Axial bonds (cyclohexane), 119 drawing, 120 Azide, amines from, 929 reduction of, 929 Azide synthesis, 929 Azo compound, 944 synthesis of, 944-945 uses of. 945... 

A completely different method of synthesis of azo compounds from diazonium salts involving radical intermediates was found by Citterio et al. (1980, 1982 c), Cit-terio and Minisci (1982), and Fontana et al. (1988). It is a new general synthesis of arylazoalkanes based on the addition of an alkyl radical to an arenediazonium ion followed by reduction of the intermediate azo radical cation adduct by a metal salt (Scheme 12-80). The preferred source for the alkyl radical R in this reaction is an alkyl iodide, which gives rise to alkyl radicals cleanly in the presence of an arenediazonium salt and a Ti3+ or Fe2+ salt as in Scheme 12-81. The overall stoichiometric equation is therefore as given in Scheme 12-82. The yields vary between 36% and 79% (with respect to alkyl iodide). 

Isocyanates and isothiocyanates are reduced to methylamines on treatment with LiAlH4. Lithium aluminium hydride does not usually reduce azo compounds (indeed these are the products from LiAlH4 reduction of nitro compounds, 19-59), but these can be reduced to hydrazo compounds by catalytic hydrogenation or with... 

Possibly the most significant discovery in the metabolism of aromatic azo compounds had implications that heralded the age of modem chemotherapy. It was shown that the bactericidal effect of the azo dye Prontosil in vivo was in fact due to the action of its transformation product, sulfanilamide, which is an antagonist of 4-aminobenzoate that is required for the synthesis of the vitamin folic acid. Indeed, this reduction is the typical reaction involved in the first stage of the biodegradation of aromatic azo compounds. 

Aromatic azo compounds, many of which are sulfonated, are components of many commercially important dyes, colorants, and pigments, so that attention has been directed to their degradation and transformation. These compounds are often considered recalcitrant, although then-transformation has been accomplished by reduction to amines with scission of the Ar-N=N-Ar bond to produce arylamines. The amines may then be degraded, for example, 6-aminonaphthalene-2-sulfonate by dioxygenation and ring fission to 5-aminosalicylate (Hang et al. 1991). This is then... 

Although the possibility of bioremediation of sites contaminated with nitrotoluene waste is clearly possible, important issues should be clearly appreciated. These include (a) additional carbon sources may be necessary to accomplish partial or complete reduction of nitro groups, (b) under aerobic conditions, dimeric azo compounds may be formed as terminal metabolites, and (c) aromatic amines may be incorporated into humic material by covalent bonding and thereby resist further degradation. 

This behaviour was rationalised by a stepwise reduction mechanism, in which a high catalyst or KOH concentration gives a high hydride concentration and leads to the aniline formation and suppression of intermolecular reactions to the dimeric azo-compound. 

---