Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Aromatizations manganese dioxide

Aromatization. Manganese dioxide in methylcyclohexane is the preferred combination for the dehydrogenation of 1,3- and 1,4-cyclohexadienes. [Pg.237]

Aromatic aldehydes react with the dimedone reagent (Section 111,70,2). All aromatic aldehydes (i) reduce ammoniacal silver nitrate solution and (ii) restore the colour of SchifiF s reagent many react with sodium bisulphite solution. They do not, in general, reduce Fehling s solution or Benedict s solution. Unlike aliphatic aldehydes, they usually undergo the Cannizzaro reaction (see Section IV,123) under the influence of sodium hydroxide solution. For full experimental details of the above tests, see under Ali-phalic Aldehydes, Section 111,70. They are easily oxidised by dilute alkaline permanganate solution at the ordinary temperature after removal of the manganese dioxide by sulphur dioxide or by sodium bisulphite, the acid can be obtained by acidification of the solution. [Pg.721]

Even ia 1960 a catalytic route was considered the answer to the pollution problem and the by-product sulfate, but nearly ten years elapsed before a process was developed that could be used commercially. Some of the eadier attempts iacluded hydrolysis of acrylonitrile on a sulfonic acid ion-exchange resia (69). Manganese dioxide showed some catalytic activity (70), and copper ions present ia two different valence states were described as catalyticaHy active (71), but copper metal by itself was not active. A variety of catalysts, such as Umshibara or I Jllmann copper and nickel, were used for the hydrolysis of aromatic nitriles, but aUphatic nitriles did not react usiag these catalysts (72). Beginning ia 1971 a series of patents were issued to The Dow Chemical Company (73) describiag the use of copper metal catalysis. Full-scale production was achieved the same year. A solution of acrylonitrile ia water was passed over a fixed bed of copper catalyst at 85°C, which produced a solution of acrylamide ia water with very high conversions and selectivities to acrylamide. [Pg.135]

A solution of 30% aqueous hydrogen peroxide in trifluoroacetic acid is useful for destructive oxidation of the aromatic ring in preference to the side chains as is usual with most oxidants. During work-up operations, the excess peroxide must be catalytically decomposed with manganese dioxide before removal of solvent to prevent explosions. [Pg.1630]

One of the most common approaches to pyrazine ring construction is the condensation of diaminoethane and 1,2-dicarbonyI compounds such as 206 to provide pyrazines 207 after aromatization. Aromatization was accomplished by treating the dihydropyrazines with manganese dioxide in the presence of potassium hydroxide <00JCS(P1)381>. The N-protected 1,2-dicarbonyl compounds 206 were prepared from L-amino acids by initial conversion into diazoketones followed by oxidation to the glyoxal. [Pg.283]

Laha, S. and Luthy, R.G. Oxidation of aniline and other primary aromatic amines by manganese dioxide. Environ. Sci. TechnoL, 24(3) 363-373, 1990. [Pg.1684]

The nitrosodisulfonate salts, particularly the dipotassium salt called Fremy s salt, are useful reagents for the selective oxidation of phenols and aromatic amines to quinones (the Teuber reaction). - Dipotassium nitrosodisulfonate has been prepared by the oxidation of a hydroxylaminedisulfonate salt with potassium permanganate, " with lead dioxide, or by electrolysis. This salt is also available commercially. The present procedure illustrates the electrolytic oxidation to form an alkaline aqueous solution of the relatively soluble disodium nitrosodisulfonate. This procedure avoids a preliminary filtration which is required to remove manganese dioxide formed when potassium permanganate is used as the oxidant. " ... [Pg.124]

Using this method, the electrophilic aromatic substitution of the electron-rich arylamine 578 by the molybdenum-complexed cation 577 affords regio- and stereoselectively the molybdenum complexes 579. Cyclization with concomitant aromatization and demetalation using activated manganese dioxide leads to the carbazole derivatives 568 (8,10,560) (Scheme 5.26). [Pg.208]

Electrophilic substitution of 3-methoxy-4-methylaniline (655) by the complex 663 leads to the molybdenum complex 664. Oxidative cyclization of complex 664 with concomitant aromatization using activated commercial manganese dioxide provides 2-methoxy-3-methylcarbazole (37) in 53% yield (560). In contrast, cyclization of the corresponding tricarbonyliron complex to 37 was achieved in a maximum yield of 11 % on a small scale using iodine in pyridine as the oxidizing agent (see Scheme 5.49). [Pg.225]

Electrophilic aromatic substitution of 708 with the iron-coordinated cation 602 afforded the iron-complex 714 quantitatively. The iron-mediated quinone imine cyclization of complex 714, by sequential application of two, differently activated, manganese dioxide reagents, provided the iron-coordinated 4b,8a-dihydrocarbazole-3-one 716. Demetalation of the iron complex 716 with concomitant... [Pg.233]

Electrophilic aromatic substitution of the arylamine 780a using the iron-complex salt 602 afforded the iron-complex 785. Oxidative cyclization of complex 785 in toluene at room temperature with very active manganese dioxide afforded carbazomycin A (260) in 25% yield, along with the tricarbonyliron-complexed 4b,8a-dihydro-3H-carbazol-3-one (786) (17% yield). The quinone imine 786 was also converted to carbazomycin A (260) by a sequence of demetalation and O-methylation (Scheme 5.86). The synthesis via the iron-mediated arylamine cyclization provides carbazomycin A (260) in two steps and 21% overall yield based on 602 (607-609) (Scheme 5.86). [Pg.245]

Reaction of the 5-aminochromene 1044 with the complex salt 577 provided via an electrophilic aromatic substitution regio- and diastereoselectively the molybdenum complex 1050. The oxidative cyclization of complex 1050 with concomitant aromatization and demetalation using activated manganese dioxide led directly to girinimbine (115) in 50% yield. Oxidation of girinimbine (115) with DDQ in methanol afforded murrayacine (124) in 64% yield (660) (Scheme 5.161). [Pg.293]

Other chemical reagents that have been used to dehydrogenate are diphenyl disulfide for 1,2,3,4-tetrahydrocarbazole itself, N-bromosuccinimide in pyridine for 1-ethoxycarbonyl-1,2,3,4-tetrahydrocarbazole, selenium dioxide for 9-methyl-1,2,3,4-tetrahydrocarbazole (a 1 5 mixture of 9-methyl-carbazole and 1-oxo-1,2,3,4-tetrahydrocarbazole was obtained ), and manganese dioxide to aromatize 1-methyl- and l,4-dimethyl-6-alkoxy-3-formyl-1,2,3,4-tetrahydrocarbazoles and 1,9-diprenyl-1,4-dihydrocarba-zole. ... [Pg.163]

Among the oxidative procedures for preparing azo compounds are oxidation of aromatic amines with activated manganese dioxide oxidation of fluorinated aromatic amines with sodium hypochlorite oxidation of aromatic amines with peracids in the presence of cupric ions oxidation of hindered aliphatic amines with iodine pentafluoride oxidation of both aromatic and aliphatic hydrazine derivatives with a variety of reagents such as hydrogen peroxide, halogens or hypochlorites, mercuric oxide, A-bromosuccinimide, nitric acid, and oxides of nitrogen. [Pg.152]

General Procedure for Oxidation of Aromatic Amines with Active Manganese Dioxide [69b]... [Pg.416]

A general method of potential synthetic usefulness is the preparation of aromatic azapentalenes by oxidation of partially saturated systems. This has been used with success in a few cases (e.g., Sections III,A,3,d,108,109 III,B,3,c,293-295 III,A,284), but it has not been extensively explored. Recently, several workers have reported some possibly significant failures while attempting the dehydrogenation of nonaromatic systems. Various 2,3-dihydroimidazo[l,2-h]pyrazoles resisted oxidation to the corresponding aromatic system with manganese dioxide, chloranil, or dicyanodichloroquinone (DDQ),355 and a... [Pg.248]

As is true for other classes of aromatic nucleophilic substitution, the halogen displacement can frequently be catalyzed by copper or copper(I) salts. Using sodium hydride as the base and copper(I) iodide as catalyst, a series of o-bromophenylethylamine derivatives, including both amides and carbamates, have been cyclized. Oxidation to the indole can be effected with manganese dioxide (81JCS(P1)290). [Pg.322]


See other pages where Aromatizations manganese dioxide is mentioned: [Pg.646]    [Pg.179]    [Pg.646]    [Pg.179]    [Pg.672]    [Pg.293]    [Pg.78]    [Pg.82]    [Pg.307]    [Pg.96]    [Pg.108]    [Pg.316]    [Pg.672]    [Pg.315]    [Pg.123]    [Pg.128]    [Pg.212]    [Pg.213]    [Pg.213]    [Pg.223]    [Pg.252]    [Pg.251]    [Pg.295]    [Pg.101]    [Pg.42]    [Pg.416]    [Pg.672]    [Pg.423]    [Pg.633]    [Pg.95]    [Pg.311]    [Pg.293]   
See also in sourсe #XX -- [ Pg.252 ]




SEARCH



Manganese dioxid

Manganese dioxide

© 2024 chempedia.info