Anion suppressed

Figure 6.13. Common anions, suppressed conductivity detection. Conditions Hamilton PRP-XllOS, 150x4.1 mm, 1.7 mM sodium bicarbonate/1.8 mM sodium carbonateTO.I mM sodium thiocyante,...

Potassium analysis is usually carried out by flame spectrometry. Atomic emission spectrometry (AES) is slightly more sensitive, though atomic absorption spectrometry (AAS) is somewhat more immune to interference. Interferences occur in the presence of high concentrations of sodium and due to the formation of refractory potassium phosphates in the flame. A solution containing 0.4 mmol cesium chloride and 0.15 mmolL lanthanum nitrate dissolved in 0.1 M HCl will reduce both cation enhancement and anionic suppression (Wieland 1992, Birch and Padgham 1993). 

Drinking water Te(IV) (3), Te(VI)(12) 3 mM Na2C0s Dionex Anion suppressed conductivity 5 ppm 55... 

Solutions of many antimony and bismuth salts hydrolyse when diluted the cationic species then present will usually form a precipitate with any anion present. Addition of the appropriate acid suppresses the hydrolysis, reverses the reaction and the precipitate dissolves. This reaction indicates the presence of a bismuth or an antimony salt. 

Sodium and chloride may be measured using ion-selective electrodes (see Electro analytical techniques). On-line monitors exist for these ions. Sihca and phosphate may be monitored colorimetricaHy. Iron is usually monitored by analysis of filters that have had a measured amount of water flow through them. Chloride, sulfate, phosphate, and other anions may be monitored by ion chromatography using chemical suppression. On-line ion chromatography is used at many nuclear power plants. 

Polyelectrolyte complex membranes are phase-inversion membranes where polymeric anions and cations react during the gelation. The reaction is suppressed before gelation by incorporating low molecular weight electrolytes or counterions in the solvent system. Both neutral and charged membranes are formed in this manner (14,15). These membranes have not been exploited commercially because of then lack of resistance to chemicals. 

The presence of a sufficientiy strong chelating agent, ie, one where K in equation 26 is large, keeps the concentration of free metal ion suppressed so that pM is larger than the saturation pM given by the solubiUty product relation (eq. 29) and no soHd phase of MX can form even in the presence of relatively high anion concentrations. The metal is thus sequestered with respect to precipitation by the anion, such as in the prevention of the formation of insoluble soaps in hard water. 

The high chemical stability of pterins towards aqueous base is due to anion formation suppressing nucleophilic attack at a ring carbon atom by electrostatic repulsion. Substitution... 

Alkyl cyanoacrylate monomers have been copolymerized with a variety of monomers, both by radical and anionic initiation. The radical-initiated copolymerization with acrylic monomers was performed with a sufficient amount of an acid stabilizer present to suppress polymerization by anionic means [19]. This investigation has been covered extensively elsewhere. 

The simplest method for obtaining selective fluonnation is to conduct reactions under conditions that invigorate the electrophilicity of fluorine In practice this method entails the creation of anionic or strongly nucleophilic reactive centers on substrate molecules while suppressing or reducing the tendency toward radical attack Numerous examples of seleetive fluorine attack on carbanionic, amido and carboxylato species are documented Especially abundant is alpha fluonnation of nitroalkanes in polar solvents [42 43, 44, 45 46] (equations 10-14)... 

The halogen migration is completely suppressed by halogen-metal exchange when the chloroethynyl group is in position 5 of the pyrazole ring. The concentrations of 3-pyrazolyl and 4-pyrazolyl anions are probably small, and they cannot compete with NH2 anions for chlorine bonded to the acetylenic carbon. 

A wide variety of physical properties are important in the evaluation of ionic liquids (ILs) for potential use in industrial processes. These include pure component properties such as density, isothermal compressibility, volume expansivity, viscosity, heat capacity, and thermal conductivity. However, a wide variety of mixture properties are also important, the most vital of these being the phase behavior of ionic liquids with other compounds. Knowledge of the phase behavior of ionic liquids with gases, liquids, and solids is necessary to assess the feasibility of their use for reactions, separations, and materials processing. Even from the limited data currently available, it is clear that the cation, the substituents on the cation, and the anion can be chosen to enhance or suppress the solubility of ionic liquids in other compounds and the solubility of other compounds in the ionic liquids. For instance, an increase in allcyl chain length decreases the mutual solubility with water, but some anions ([BFJ , for example) can increase mutual solubility with water (compared to [PFg] , for instance) [1-3]. While many mixture properties and many types of phase behavior are important, we focus here on the solubility of gases in room temperature IFs. 

In IC this problem of electrolyte background is overcome by means of eluant suppression. Thus in the above example of sodium and potassium analysis, if the effluent from the separating column is passed through a strong base anion exchange resin in the hydroxide form (suppressor column) the following two processes occur ... 

It is appropriate to refer here to the development of non-suppressed ion chromatography. A simple chromatographic system for anions which uses a conductivity detector but requires no suppressor column has been described by Fritz and co-workers.28 The anions are separated on a column of macroporous anion exchange resin which has a very low capacity, so that only a very dilute solution (ca 10 4M) of an aromatic organic acid salt (e.g. sodium phthalate) is required as the eluant. The low conductance of the eluant eliminates the need for a suppressor column and the separated anions can be detected by electrical conductance. In general, however, non-suppressed ion chromatography is an order of magnitude less sensitive than the suppressed mode. 

---