Ammonium salt catalysis

Key words oxycycloalkylperoxides, quaternary ammonium salts, catalysis, supramolecular mechanism, initiation efficiency, molecular modeling... 

This property of quaternary ammonium salts is used to advantage m an experi mental technique known as phase transfer catalysis Imagine that you wish to carry out the reaction... 

Quaternary ammonium salts compounds of the type R4N" X find application m a technique called phase transfer catalysis A small amount of a quaternary ammonium salt promotes the transfer of an anion from aqueous solution where it is highly solvated to an organic solvent where it is much less solvated and much more reactive... 

Cobalt(II) oxalate [814-89-1], C0C2O4, is a pink to white crystalline material that absorbs moisture to form the dihydrate. It precipitates as the tetrahydrate on reaction of cobalt salt solutions and oxaUc acid or alkaline oxalates. The material is insoluble in water, but dissolves in acid, ammonium salt solutions, and ammonia solution. It is used in the production of cobalt powders for metallurgy and catalysis, and is a stabilizer for hydrogen cyanide. 

Phase-transfer catalysis (Section 22.5) Method for increasing the rate of a chemical reaction by transporting an ionic reactant from an aqueous phase where it is solvated and less reactive to an organic phase where it is not solvated and is more reactive. Typically, the reactant is an anion that is carried to the organic phase as its quaternary ammonium salt. 

It is important to make the distinction between the multiphasic catalysis concept and transfer-assisted organometallic reactions or phase-transfer catalysis (PTC). In this latter approach, a catalytic amount of quaternary ammonium salt [Q] [X] is present in an aqueous phase. The catalyst s lipophilic cation [Q] transports the reactant s anion [Y] to the organic phase, as an ion-pair, and the chemical reaction occurs in the organic phase of the two-phase organic/aqueous mixture [2]. 

Phase transfer catalysis (PTC) refers to the transfer of ions or organic molecules between two liquid phases (usually water/organic) or a liquid and a solid phase using a catalyst as a transport shuttle. The most common system encountered is water/organic, hence the catalyst must have an appropriate hydrophilic/lipophilic balance to enable it to have compatibility with both phases. The most useful catalysts for these systems are quaternary ammonium salts. Commonly used catalysts for solid-liquid systems are crown ethers and poly glycol ethers. Starks (Figure 4.5) developed the mode of action of PTC in the 1970s. In its most simple... 

Catalysis, enzymatic, physical organic model systems and the problem of, 11,1 Catalysis, general base and nucleophilic, of ester hydrolysis and related reactions, 5,237 Catalysis, micellar, in organic reactions kinetic and mechanistic implications, 8,271 Catalysis, phase-transfer by quaternary ammonium salts, 15,267 Catalytic antibodies, 31,249... 

Partitioning of carbocations between addition of nucleophiles and deprotonation, 35, 67 Perchloro-organic chemistry structure, spectroscopy and reaction pathways, 25, 267 Permutational isomerization of pentavalent phosphorus compounds, 9, 25 Phase-transfer catalysis by quaternary ammonium salts, 15, 267 Phosphate esters, mechanism and catalysis of nucleophilic substitution in, 25, 99 Phosphorus compounds, pentavalent, turnstile rearrangement and pseudoration in permutational isomerization, 9, 25... 

Epoxidation is another important area which has been actively investigated on asymmetric phase transfer catalysis. Especially, the epoxidation of various (i.)-a,p-unsaturated ketones 68 has been investigated in detail utilizing the ammonium salts derived from cinchonine and cinchonidine, and highly enantioselective and diastereoselective epoxidation has now been attained. When 30 % aqueons H202 was utilized in the epoxidation of various a, 3-unsaturated ketones 68, use of the 4-iodobenzyl cin-choninium bromide 7 (R=I, X=Br) together with LiOH in Bu20 afforded the a,p-epoxy ketones 88 up to 92% ee,1641 as shown in Table 5. The O-substituted... 

E. J. Corey, F.-Y. Zhang, Mechanism and Conditions for Highly Enantioselective Epoxidation of a,p-Enones Using Charge-Accelerated Catalysis by a Rigid Quaternary Ammonium Salt , Org. Lett. 1999,1,1287-1290. 

Increasing the hydrophobicity of quaternary ammonium salts increases the apparent extraction constants for the ion pair and therefore leads to a higher catalytic activity (Brandstrom, 1977). The same phenomenon has been observed by Cinquini and Tundo (1976) for crown ether catalysis (Table 35). The catalytic activity of 18-crown-6 [3] and alkyl-substituted derivatives [117]—[ 119] in the reaction of n-CgH17Br with aqueous KI follows the order [117], [118] > [119] s> [3]. The alkyl-substituted [2.2]-cryptand derivatives are also much more efficient than the parent compound [86]. Increasing the hydrophobicity of [2.2.2]-cryptand (Cinquini et al., 1975) and even of polypode ligands (Fornasier et al., 1976) leads to higher catalytic activity. The tetradecyl-substituted compounds show the reactivity sequence [2.2.2]-cryptand at 18-crown-6 > [2.2]-cryptand on the reactivity scale that can be distilled from Table 35. 

Additional work was carried out by the GE group on optimization of the reaction yield and to eliminate unwanted linear oligomers [14], Three side reactions which interfere with synthesis of cyclics were identified reaction of the amine with acid chloride to form an acyl ammonium salt, followed by decomposition to an amide (Equation (3.2)) reaction with CH2CI2 to form a salt (Equation (3.3)) hydrolysis of the acid chloride, forming carboxylate via catalysis... 

It was a result of demand from industry in the mid-1960s for an alternative to be found for the expensive traditional synthetic procedures that led to the evolution of phase-transfer catalysis in which hydrophilic anions could be transferred into an organic medium. Several phase-transfer catalysts are available quaternary ammonium, phosphonium and arsonium salts, crown ethers, cryptands and polyethylene glycols. Of these, the quaternary ammonium salts are the most versatile and, compared with the crown ethers, which have many applications, they have the advantage of being relatively cheap, stable and non-toxic [1, 2]. Additionally, comparisons of the efficiencies of the various catalysts have shown that the ammonium salts are superior to the crown ethers and polyethylene glycols and comparable with the cryptands [e.g. 3, 4], which have fewer proven applications and require higher... 

A large number of reviews of phase-transfer catalysis in general, incorporating the use of quaternary ammonium salts, have appeal ed since the 1960s [e.g. 18, 51-66]. Many of the early articles are of important historical interest, whereas the later reviews illustrate the manner in which applications of the technique have mush-... 

More detailed discussions of the optimum choice of quaternary ammonium salt for phase-transfer catalysis are available elsewhere [1, 5-8]. 

The application of phase-transfer catalysis to the Williamson synthesis of ethers has been exploited widely and is far superior to any classical method for the synthesis of aliphatic ethers. Probably the first example of the use of a quaternary ammonium salt to promote a nucleophilic substitution reaction is the formation of a benzyl ether using a stoichiometric amount of tetraethylammonium hydroxide [1]. Starks mentions the potential value of the quaternary ammonium catalyst for Williamson synthesis of ethers [2] and its versatility in the synthesis of methyl ethers and other alkyl ethers was soon established [3-5]. The procedure has considerable advantages over the classical Williamson synthesis both in reaction time and yields and is certainly more convenient than the use of diazomethane for the preparation of methyl ethers. Under liquidrliquid two-phase conditions, tertiary and secondary alcohols react less readily than do primary alcohols, and secondary alkyl halides tend to be ineffective. However, reactions which one might expect to be sterically inhibited are successful under phase-transfer catalytic conditions [e.g. 6]. Microwave irradiation and solidrliquid phase-transfer catalytic conditions reduce reaction times considerably [7]. 

---