Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Amines oxidative addition

Hence, the copper surface catalyzes the following reactions (a) decomposition of hydroperoxide to free radicals, (b) generation of free radicals by dioxygen, (c) reaction of hydroperoxide with amine, and (d) heterogeneous reaction of dioxygen with amine with free radical formation. All these reactions occur homolytically [13]. The products of amines oxidation additionally retard the oxidation of hydrocarbons after induction period. The kinetic characteristics of these reactions (T-6, T = 398 K, [13]) are presented below. [Pg.689]

No studies on the mechanism of the complete catalytic cycle for formation of aryl ethers from aryl halides have been conducted, but the elementary reactions in the cycle are likely to be similar to those in the catalytic cycle for formation of aryl amines. Oxidative addition, formation of an alkoxo complex, and reductive elimination of ether are likely to occur. It is the slow reductive elimination of ether that allows for amide complexes to form and undergo reductive elimination in the presence of t-BuO" instead of undergoing reductive elimination of ether. [Pg.1102]

Use of alcohol as a solvent for carbonylation with reduced Pd catalysts gives vinyl esters. A variety of acrylamides can be made through oxidative addition of carbon monoxide [630-08-0] CO, and various amines to vinyl chloride in the presence of phosphine complexes of Pd or other precious metals as catalyst (14). [Pg.414]

This formula was confirmed hy Haworth and Perkin s synthesis of a-flZZocryptopine from herherine, the first application of a process, of which examples have heen given already in the syntheses of cryptopine (p. 298) and protopine (p. 301) hy the same authors. Anhydrotetrahydromethyl-herherine (I cf. hase (a), p. 346) in dry chloroform was added to a solution of perhenzoic acid in ether cooled helow 5°. The amine oxide, C21H23O5N (II), separated as an oil, which after shaking with sodium hydroxide solution, solidified and was crystallised from water in slender prisms, m.p. 135°. It was dissolved in acetic acid, hydrochloric acid added, the mixture heated in boiling water for an hour and the hase precipitated hy addition of potassium hydroxide. The precipitate was dissolved in methyl alcohol, ether added, the alcohol washed out with water and the ethereal... [Pg.302]

The three steps 32-34 have been suggested77 to be equilibria, and the overall equilibrium must lie far to the left because no adduct 23 is found in the reaction mixture when the reaction of sulfonyl chloride with olefin is carried out in the absence of a tertiary amine. A second possible mechanism involving oxidative addition of the arenesulfonyl halide to form a ruthenium(IV) complex and subsequent reductive elimination of the ruthenium complex hydrochloride, [HRulvCl], was considered to be much less likely. [Pg.1105]

Carbon-carbon bond formation reactions and the CH activation of methane are another example where NHC complexes have been used successfully in catalytic applications. Palladium-catalysed reactions include Heck-type reactions, especially the Mizoroki-Heck reaction itself [171-175], and various cross-coupling reactions [176-182]. They have also been found useful for related reactions like the Sonogashira coupling [183-185] or the Buchwald-Hartwig amination [186-189]. The reactions are similar concerning the first step of the catalytic cycle, the oxidative addition of aryl halides to palladium(O) species. This is facilitated by electron-donating substituents and therefore the development of highly active catalysts has focussed on NHC complexes. [Pg.14]

The mechanism involves a Pd(0) monocoordinate complex as the active species that undergoes oxidative addition to the aryl halide [141]. Thereafter, coordination of the amine to the palladium centre and deprotonation by the external base results in halide abstraction. After reductive elimination, the coupling product is obtained and the catalytic active species regenerated (Scheme 6.45). [Pg.181]

Although the oxidative addition of the N-H bond of NH3 and amines to transition metal complexes had been known for some time [140], it was only in the late 1980s that Milstein et al. succeeded in designing a homogeneously catalyzed hydroamina-tion reaction involving such an activation process (Eq. 4.27) [141]. [Pg.104]

Several studies were performed in order to establish the mechaiusm (5-7). The currently accepted mechartism, presented in Scheme 26.1 for the Pd(BINAP) catalyzed amination, involves the formation of a complex, Pd(BINAP)2 from a catalyst precursor (usually Pd(OAc)2 or Pd2(dba)3) and ligand this complex lies outside the catalytic cycle and undertakes dissociation of one BINAP to form Pd(BINAP) the following steps are the oxidative addition of the aryl halide to the Pd(BINAP), reaction with amine and base, and the reductive elimination of the product to reform Pd(BlNAP). [Pg.224]

Allyl carbonate esters are also useful hydroxy-protecting groups and are introduced using allyl chloroformate. A number of Pd-based catalysts for allylic deprotection have been developed.209 They are based on a catalytic cycle in which Pd° reacts by oxidative addition and activates the allylic bond to nucleophilic substitution. Various nucleophiles are effective, including dimedone,210 pentane-2,4-dione,211 and amines.212... [Pg.266]

There are a number of procedures for coupling of terminal alkynes with halides and sulfonates, a reaction that is known as the Sonogashira reaction.161 A combination of Pd(PPh3)4 and Cu(I) effects coupling of terminal alkynes with vinyl or aryl halides.162 The reaction can be carried out directly with the alkyne, using amines for deprotonation. The alkyne is presumably converted to the copper acetylide, and the halide reacts with Pd(0) by oxidative addition. Transfer of the acetylide group to Pd results in reductive elimination and formation of the observed product. [Pg.726]

Some of the details of the mechanism may differ for various catalytic systems. There have been kinetic studies on two of the amination systems discussed here. The results of a study of the kinetics of amination of bromobenzene using Pd2(dba)3, BINAP, and sodium r-amyloxide in toluene were consistent with the oxidative addition occurring after addition of the amine at Pd. The reductive elimination is associated with deprotonation of the animated palladium complex.166... [Pg.1046]

A study of the reaction of chlorobenzene with /V-mclhyl aniline in the presence of Pd[P(r-Bu)3]2 and several different bases indicated that two mechanisms may occur concurrently, with their relative importance depending on the base, as indicated in the catalytic cycle below. The cycle on the right depicts oxidative addition followed by ligation by the deprotonated amine. The cycle on the left suggests that oxidative addition occurs on an anionic adduct of the catalyst and the base, followed by exchange with the amine ligand.167... [Pg.1047]

Gold(I) complexes of the type [AuCl(PPh3)ra] (n= 1, 2) or [Au(N03)(PPh3)] show an excellent performance towards oxidative addition carbonylation or aromatic amines to form corresponding carbamates, and also towards the carbonilation of aliphatic amines to produce either alkylureas or formamides.2552,2553 Cationic gold(I) compounds of the type [AuL]+ where L = phosphine, phosphite, or arsine are excellent catalysts for the addition of alcohols to alkynes.2554... [Pg.1047]

Adducts of ethylene oxide with fatty amines can yield mono- (9.46) or di-substituted (9.47) products, as can the adducts with fatty amides (9.48, 9.49). In practice the products formed are far from being as simple or as symmetrical as represented by these formulae since, amongst other things, the ethylene oxide addition takes place randomly. [Pg.25]

Decamethylsilicocene (1) reacts with primary and secondary amines to give the corresponding oxidative addition products in good yield [8],... [Pg.90]

In addition, complexes of P(/-Bu)3 have been shown to catalyze the formation of diaryl heteroarylamines from bromothiophenes.224 Aminations of five-membered heterocyclic halides such as furans and thiophenes are limited because their electron-rich character makes oxidative addition of the heteroaryl halide and reductive elimination of amine slower than it is for simple aryl halides. Reactions of diarylamines with 3-bromothiophenes occurred in higher yields than did reactions of 2-bromothiophene, but reactions of substituted bromothiophenes occurred in more variable yields. The yields for reactions of these substrates in the presence of catalysts bearing P(/-Bu)3 as ligand were much higher than those in the presence of catalysts ligated by arylphosphines. [Pg.375]


See other pages where Amines oxidative addition is mentioned: [Pg.488]    [Pg.254]    [Pg.488]    [Pg.254]    [Pg.127]    [Pg.418]    [Pg.450]    [Pg.451]    [Pg.192]    [Pg.311]    [Pg.256]    [Pg.159]    [Pg.109]    [Pg.146]    [Pg.260]    [Pg.303]    [Pg.38]    [Pg.225]    [Pg.716]    [Pg.491]    [Pg.134]    [Pg.135]    [Pg.103]    [Pg.173]    [Pg.177]    [Pg.171]    [Pg.191]    [Pg.107]    [Pg.375]    [Pg.391]   
See also in sourсe #XX -- [ Pg.1201 ]




SEARCH



Additives, 423 Amines

Amination reactions oxidative addition

Amines, activation oxidative addition

Oxidative Addition Reactions of Primary Amines with Isocyanides

Oxidative addition amine isomerization

Oxidative addition aryl halides, amination reactions

Palladium-catalyzed amination oxidative addition

© 2024 chempedia.info