Amination/intramolecular hydroamination

The Rh and Ir complexes 85-88 (Fig. 2.14) have been tested for the intramolecular hydroamination/cyclisation of 4-pentyn-l-amine to 2-methyl-1-pyrroline (n = 1). The reactions were carried out at 60°C (1-1.5 mol%) in THF or CDCI3 The analogous rhodium systems were more active. Furthermore, the activity of 87 is higher than 85 under the same conditions, which was attributed to the hemilabihty of the P donor in the former complex, or to differences in the trans-eSects of the phosphine and NHC ligands, which may increase the lability of the coordinated CO in the pre-catalyst [75,76]. 

Chang et al. reported a mild tandem intramolecular hydroamination of yne amines to form an endo-adduct intermediate, which reacts with electron-deficient azides to produce cyclic amidines <06JA12366>. Selected examples of an interesting synthetic route to tropene derivatives 165 via a dual hydroamination strategy is shown below. This one-step reaction makes use of a palladium catalyst and takes place by sequential intermolecular hydroamination of cycloheptatriene with aryl, heteroaryl, and primary alkyl amines to generate intermediate 166, followed by transannular intramolecular hydroamination <06JA8134>. 

Intramolecular hydroamination of cyclohexa-2,5-dienes has afforded the corresponding bicyclic allylic amines with high selectivity (Scheme 13).80 The reaction does not proceed through a direct hydroamination of one of the diastereotopic alkenes but more likely involves a diastereoselective protonation of a pentadienyl anion, followed by addition of a lithium amide across the double bond of the resulting 1,3-diene and a highly regioselective protonation of the final allylic anion. 

A facile intramolecular hydroamination of unactivated alkenes (58), catalysed by the palladium complex (60), has been reported to take place at room temperature. The formation of hydroamination products (59) rather than oxidative amination products is believed to be due to the use of a tridentate ligand, which effectively inhibits -hydride elimination.78... 

Intramolecular hydroamination of cyclohexa-2,5-dienes (204) mediated by Bu"Li has been reported to produce the corresponding bicyclic allylic amines (205) with high... 

An yttrium(III) complex derived from ligand (100) has been shown to be a superior catalyst for enantioselective intramolecular hydroaminations of alkenes that provide cyclic amines with enantioselectivities ranging from 69 to 89% ee,132... 

Cazes et al. reported the Pd-catalyzed intermolecular hydroamination of substituted allenes using aliphatic amines in the presence of triethylammonium iodide leading to allylic amines [19]. In a way similar to the Pd-catalyzed hydrocarbona-tion reactions we reported that the hydroamination of allenes [20], enynes [21], methylenecyclopropanes [22], and cyclopropene [10] proceeds most probably via oxidative addition of an N-H bond under neutral or acidic conditions to give allylic amines. The presence of benzoic acid as an additive promotes the Pd-medi-ated inter- and intramolecular hydroamination of internal alkynes [23]. Intramolecular hydroamination has attracted more attention in recent years, because of its importance in the synthesis of a variety of nitrogen-containing heterocycles found in many biologically important compounds. The metal-catalyzed intramolecular hydroamination/cyclization of aminoalkenes, aminodienes, aminoallenes, and aminoalkynes has been abundantly documented [23]. 

Intramolecular addition of amine N-H bonds to carbon-carbon multiple bonds would afford nitrogen heterocycles. To realize catalytic cyclization of a,co-aminoalkenes or aminoalkynes, various catalytic systems have been developed especially with early transition metals such as titanium, zirconium, lanthanide metals, and actinide metals [ 12], Late-transition-metal catalysis based on Ni, Pd, and Rh has also proved to be efficient [ 12], Recently, the ruthenium-catalyzed intramolecular hydroamination of aminoalkynes 15 was reported to afford 5-7-membered ring products 16 in various yields (Eq. 6) [13]. Among... 

A palladium-catalyzed three-component reaction with 2-iodobenzoyl chloride or methyl 2-iodobenzoate, allene and primary aliphatic or aromatic amines to prepare fV-substituted 4-methylene-3,4-dihydro-1 (27/)-isoquinolin-1 -ones was disclosed <02TL2601>. A synthesis of 1-substituted 1,2,3,4-tetrahydroisoquinolines via a Cp2TiMe2-catalyzed, intramolecular hydroamination/cyclization of aminoalkynes was also reported <02TL3715>. Additionally, a palladium-catalyzed one-atom ring expansion of methoxyl allenyl compounds 79 to prepare compounds 80 that can serve as precursors to isoquinolones was reported <02OL455,02SL480>. 

Intramolecular hydroamination/cyclization, the addition of an N-H bond across an intramolecular carbon-carbon unsaturated bond, offers an efficient, atom economical route to nitrogen-containing heterocyclic molecules (Equation 8.37). Numerous organolanthanide complexes were found to be efficient catalysts for this transformation [124, 125]. The real active intermediates are organolanthanide amides, which are formed by the rapid protonolysis reactions of precatalysts with amine substrates. The proposed catalytic cycle of hydroamination/cyclization of aminoalkenes is presented in Figure 8.37 [124]. 

Cyclic Amines by Intramolecular Hydroamination and Carboamination Substrate-Induced Diastereoselectivity... 

Although this mechanism is based on known activation of the N-H bond of aniline by Ru3(CO)i2, a mechanism involving the activation of the carbon-carbon triple bond followed by a nucleophilic attack of the amine carmot be discarded. Indeed, typical Lewis acids such as Zn(II) or Cu(I) salts have been shown to be efficient catalysts for the intramolecular hydroamination of alkyne [93], However, contrary to ruthenium(II) complexes, mthenium(O) catalysts are not expected to electrophili-cally activate alkynes. 

When Marks and co-workers [10] published their investigations of the organo-lanthanide-catalyzed intramolecular hydroamination of appropriate a,ai-amino-lefms, the opened a useful synthetic route to different types of cyclic amines (Scheme 4) in combination with a thorough analysis of the catalytic reaction mechanism and the structure-reactivity relationships. 

Type 4 metallocene complexes catalyze the regioselective mtermolecular addition of primary amines to acetylenic, olefinic, and diene substrates at rates which are = 1/1000 those of the most rapid intramolecular analogues [165]. Variants such as the intramolecular hydroamination/cyclization of aminoallenes [166] and the intra- and intermolecular tandem C-N and C-C bond-forming processes of aminodialkenes, aminodialkynes, aminoallenynes, and aminoalkynes [167] were applied as new regio- and stereoselective approaches to naturally occurring alkaloids. For example, bicyclic pyrrolizidine intermediate E... 

The scope of the lanthanide-mediated, intramolecular amination/cyclization reaction has been determined for the formation of substituted quinolizidines, indolizidines, and pyrrolizidines,1046 as well as tricyclic and tetracyclic aromatic nitrogen heterocycles.1047 The amide derivative OT ro-[ethylene-bis(indenyl)]ytterbium(m) bis(trimethyl-silyl)amide catalyzes the hydroamination of primary olefins in excellent yields.701 A facile intramolecular hydroamination process catalyzed by [(C5H4SiMe3)2Nd(/r-Me)]2 has also been reported. The lanthanide-catalyzed hydroamination enables a rapid access to 10,1 l-dihydro-5//-dibenzo[tf,rf]cyclohepten-5,10-imines (Scheme 283).1048... 

Rare-earth metal complexes have proven to be very efficient catalysts for intramolecular hydroamination reactions involving aminoalkenes, aminoalkynes, aminoallenes, and conjugated aminodienes [88, 97]. They are significantly less efficient in intermolecular hydroamination reactions and only a limited number of examples are known [98-102]. The difficulties in intermolecular hydroamination reactions originate primarily from inefficient competition between strongly binding amines and weakly binding alkenes for vacant coordination sites at the catalytically active metal center. 

Additional catalytic investigation of p-diketiminate scandium complexes by Piers and coworkers showed that well-characterized complexes 121 and 122 with the bulky ligand L27 were highly active catalysts for intramolecular hydroamination to form nitrogen heterocycles. The catalytic reaction was monitored by determining starting material and product with NMR. Both the neutral complex 121 and the CIP complex 122 are effective catalysts (10 mol%) for the intramolecular hydroamination of 5-phenyl-4-pentyl-l-amine (R = H, R = Ph, n = 1 in Scheme 42). However, they are not active catalysts for the potential application to the intermolecular hydroamination of 1-hexyne with alkylamines [82],... 

The bis(amido) complexes 141 and 142 showed no catalytic activity in inter- or intramolecular hydroamination reactions. Because of the low basicity of the Ph2N group, it cannot be protonated by aliphatic amines RNH2 or R2NH. Therefore, the initial step of the catalysis failed and these complexes do not serve as catalysts for inter- or intramolecular hydroamination. 

The catalytic activity of the chiral complexes [Ln(L)Z2] shown in Scheme 70 was investigated in NMR-scale intramolecular hydroamination/cyclization reactions [135]. The rate dependence on the ionic radii of the center metal was studied by using 5 mol% bisoxazoline L32 and [Ln N(SiMe3)2 3] as precatalysts and 2,2-dimethyl-4-penten-l-amine as substrate (Scheme 71). The reaction rate as well as the enantioselectivities increased with increasing radius of the center metal. Therefore, the lanthanum compound 184 was the most active catalyst among the investigated complexes. 

Organolithium mediated cycloisomerization of chiral aminoalkenes may proceed with high diastereoselectivities when favored by the substrate geometry. The last step ofthe enantioselective synthesis of ( ) codeine (80), reported by Trost and Tang [121], consisted of an intramolecular hydroamination. Treatment of amine 79 with LDA or wBuLi in refluxing THF left the starting material unreacted. However, irradiation of the amine/LDA solution with a 150 W tungsten lamp led to diastereoselective cycloisomerization to form ( ) codeine (80) (Eq. 11.11). 

Addition and cyclization reactions. Chiral propargylic amines are obtained from aUcynylation of imines by catalysis of the silver salt of IB. The enantiomer of phosphate ID also finds use in the addition of indole to a-acetaminostyrenes. One more catalyst for intramolecular hydroamination to form pyrrolidine derivatives is the silylated 3. The... 

Intramolecular hydroamination to afford 5- and 6-membered cyclic amines is also assisted by (cod)2RhBp4, together with a bidentate ligand such as 2 or 3. ... 

---