Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Amides neutrality

Planar polyaromatic/heteroc clic amines and amides, neutral or basic, lipophilic, with one putative H-bond donating site... [Pg.468]

At temperatures of 220-240 C it functions as an efficient, neutral dehydrating agent, amides yielding nitriles and alcohols yielding alkenes. [Pg.203]

Anhydrous magnesium sulphate. This is an excellent, neutral desiccating agent and is inexpensive. It is rapid in its action, chemically inert and fairly efficient, and can be employed for most compounds including those (esters, aldehydes, ketones, nitriles, amides, etc.) to which calcium chloride is not applicable. [Pg.140]

This group comprises substances of the tjrpe RCONHR and RCONR R", i.e., substituted amides of the aromatic series. They are all well-defined crystalline sohds, sparingly soluble in cold but, often, appreciably soluble hi hot water and moderately soluble in ether they are generally neutral or feebly basic in reaction. [Pg.801]

The imides, primaiy and secondary nitro compounds, oximes and sulphon amides of Solubility Group III are weakly acidic nitrogen compounds they cannot be titrated satisfactorily with a standard alkaU nor do they exhibit the reactions characteristic of phenols. The neutral nitrogen compounds of Solubility Group VII include tertiary nitro compounds amides (simple and substituted) derivatives of aldehydes and ketones (hydrazones, semlcarb-azones, ete.) nitriles nitroso, azo, hydrazo and other Intermediate reduction products of aromatic nitro compounds. All the above nitrogen compounds, and also the sulphonamides of Solubility Group VII, respond, with few exceptions, to the same classification reactions (reduction and hydrolysis) and hence will be considered together. [Pg.1074]

Alkynyl anions are more stable = 22) than the more saturated alkyl or alkenyl anions (p/Tj = 40-45). They may be obtained directly from terminal acetylenes by treatment with strong base, e.g. sodium amide (pA, of NH 35). Frequently magnesium acetylides are made in proton-metal exchange reactions with more reactive Grignard reagents. Copper and mercury acetylides are formed directly from the corresponding metal acetates and acetylenes under neutral conditions (G.E. Coates, 1977 R.P. Houghton, 1979). [Pg.5]

Scheme 30) (6). Infrared spectra of the products possess a normal amide carbonyl absorption, indicating that the products are not present on the dipolar form (30) but rather as the neutral A -thiazoline tautomer (31 or 32) (6). [Pg.15]

The HCl by-product of the amidation reaction is neutralized by also dissolving an inorganic base in the aqueous layer in interfacial polymerization. The choice of the organic solvent plays a role in determining the properties of the polymer produced, probably because of differences in solvent goodness for the resulting polymer. Since this reaction is carried out at low temperatures, the complications associated with side reactions can be kept to a minimum. [Pg.307]

Hydrazinium salts, N2H5 X, are acids in anhydrous hydrazine, metallic hydrazides, N2H, are bases. Neutralization in this solvent system involves the hydrazinium and hydrazide ions and is the reverse of equation 7. Metal hydrazides, formally analogous to the metal amides, are prepared from anhydrous hydrazine and the metals as well as from metal amides, alkyls, or hydrides. (The term hydrazide is also used for organic compounds where the carboxyUc acid OH is substituted with a N2H2.) Sodium hydrazide [13598-47-5] is made from sodium or, more safely, from sodium amide (14) ... [Pg.275]

The aramids are formed in the low temperature reaction, -10 to 60°C, of equimolar amounts of the diacid chloride and the diamine in an amide solvent, typically dimethyl acetamide (DMAc) or A/-meth5i-2-pyrrohdinone (NMP) and usually with a small amount of an alkaU or alkaline-earth hydroxide and a metal salt, such as LiOH [1310-65-2] LiCl, Ca(OH)2 [1305-62-0] or CaCl2 added to increase the solubiUty of the polymer and neutralize the hydrochloric acid generated in the reaction. [Pg.240]

This procedure is restricted mainly to aminodicarboxyhc acids or diaminocarboxyhc acids. In the case of neutral amino acids, the amino group or carboxyl group must be protected, eg, by A/-acylation, esterification, or amidation. This protection of the racemic amino acid and deprotection of the separated enantiomers add stages to the overall process. Furthermore, this procedure requires a stoichiometric quantity of the resolving agent, which is then difficult to recover efficiendy. Practical examples of resolution by this method have been pubUshed (50,51). [Pg.278]

The -NH(CH2)3N(CH2)2 amide of teicoplanin factor A2-2, coded MPT. 62,873 [122173-74-4] was also prepared. The combined effect of a moderate basicity and a slightly increased lipophilicity at neutral pH probably led to a better penetration through the cell wall. MDL 62,873 was consistentiy more active than teicoplanin against CNS clinical isolates (119,120). No semisynthetic dalbaheptide is under clinical evaluation at this writing. [Pg.537]

Zinc chloride melts at 275°C, bods at 720°C, and is stable in the vapor phase up to 900°C. It is very hygroscopic, extremely water-soluble, and soluble in organic Hquids such as alcohols, esters, ketones, ethers, amides, and nitrides. Hydrates with 1, 1.5, 2.5, 3, and 4 molecules of water have been identified and great care must be exercised to avoid hydration of the anhydrous form. Aqueous solutions of zinc chloride are acidic (pH = 1.0 for 6 M) and, when partially neutralized, can form slightly soluble basic chlorides, eg, ZnCl2 4Zn(OH)2 [11073-22-6] and Zn(OH)Cl [14031-59-5]. Many other basic chlorides have been reported (58). [Pg.423]


See other pages where Amides neutrality is mentioned: [Pg.41]    [Pg.278]    [Pg.144]    [Pg.645]    [Pg.269]    [Pg.124]    [Pg.124]    [Pg.41]    [Pg.278]    [Pg.144]    [Pg.645]    [Pg.269]    [Pg.124]    [Pg.124]    [Pg.248]    [Pg.251]    [Pg.1006]    [Pg.1048]    [Pg.1071]    [Pg.903]    [Pg.128]    [Pg.134]    [Pg.139]    [Pg.140]    [Pg.489]    [Pg.451]    [Pg.20]    [Pg.172]    [Pg.240]    [Pg.397]    [Pg.401]    [Pg.9]    [Pg.359]    [Pg.537]    [Pg.199]    [Pg.245]    [Pg.1]    [Pg.5]    [Pg.37]    [Pg.329]    [Pg.389]    [Pg.48]    [Pg.277]    [Pg.245]   
See also in sourсe #XX -- [ Pg.189 ]

See also in sourсe #XX -- [ Pg.547 ]




SEARCH



Amide groups neutral

Anion binding by neutral ferrocene-amide receptors

Neutral Homoleptic Zinc, Cadmium and Mercury Amides

© 2024 chempedia.info