Alkynes, catalyzed reactions

The benzene derivative 409 is synthesized by the Pd-catalyzed reaction of the haloenyne 407 with alkynes. The intramolecular insertion of the internal alkyne, followed by the intermolecular coupling of the terminal alkyne using Pd(OAc)2, Ph3P, and Cul, affords the dienyne system 408, which cyclizes to the aromatic ring 409[281]. A similar cyclization of 410 with the terminal alkyne 411 to form benzene derivatives 412 and 413 without using Cul is explained by the successive intermolecular and intramolecuar insertions of the two triple bonds and the double bond[282]. The angularly bisannulated benzene derivative 415 is formed in one step by a totally intramolecular version of polycycli-zation of bromoenediyne 414[283,284],... 

Propargylic (or 2-alkynyl) compounds are derivatives of alkynes. However, Pd-catalyzed reactions of propargylic derivatives, particularly esters and halides, are very different mechanistically from those of simple alkynes, except in a few cases. Therefore, the reactions of propargylic esters and halides are treated in this section separately from those of other alkynes. However, some reactions of propargylic alcohols, which behave similarly to simple alkynes, are treated in Section 6. 

Aikynes undergo a variety of reactions using either Pd(H) or Pd(0), and they are treated separately oxidative reactions of alkynes with Pd(Il) are treated in Chapter 3, Section 8. Pd(0)-catalyzed reactions of alkynes with halides in Section 1.1.2 in this chapter, and other reactions in this section. 

Aikynes insert into the silacyclobutane 168 to form the silacyclohe.xene 169[93]. Also, the silacyclopropene 170 is expanded to the silacyclopentadiene 171 by the insertion of an alkyne[94]. The insertion product 173 was obtained by the Pd-catalyzed reaction of the neopentylidenesilirane 172 with acety-lene[95]. 

Stereoselective and chemoselective semihydrogenation of the internal alkyne 208 to the ew-alkene 210 is achieved by the Pd-catalyzed reaction of some hydride sources. Tetramethyldihydrosiloxane (TMDHS) (209) i.s used in the presence of AcOH[116]. (EtO)3SiH in aqueous THF is also effective for the reduction of alkynes to di-alkenes[l 17], Semihydrogenation to the d.v-alkene 211 is possible also with triethylammonium formate with Pd on carbon[118]. Good yields and high cis selectivity are obtained by catalysis with Pd2fdba)3-Bu3P[119],... 

The skeletal rearrangement of various strained cyclic compounds is carried out with a catalytic amount of soluble complexes of PdCl2. Namely, the rearrangements of bulvalene (67) to bicyclo[4.2.2]deca-2,4,7,9-tetraene (68)[54], cubane (69) to cuneane (70)[55], hexamethyl Dewar benzene (71) to hexa-methylbenzene (72)[56], and 3-oxaquadricyclanes[57] and quadricyclane (73) to norbornadiene[58-60] take place mostly at room temperature. Reaction of iodocubane (74) with a terminal alkyne catalyzed by Pd(0) and CuBr unexpectedly affords an alkynylcyclooctatetraene 75, without giving the desired cubylalkyne 76. Probably the rearrangement is a Pd-catalyzed reaction[61]. 

In Scheme 10, HMG-CoA reductase inhibitor 92 was synthesized via a Suzuki coupling approach. Hiyama s group also carried out a Hiyama coupling to make the same compound (93TL8263). Vinylsilane 119 was prepared by platinum-catalyzed reaction from terminal alkyne 89. 

Vinylic halides can react by a SrnI mechanism (p. 855) in some cases. An example is the FeCl2 catalyzed reaction of l-bromo-2-phenylethene and the enolate anion of pinacolone (t-BuCOCH2 ), which gave a low yield of substitution products along with alkynes. ... 

Palladium-catalyzed reaction of alkyne 47 with a variety of aryl and vinyl halides afforded alkenes 48 in good yield. Cyclization to quinolines 49 was performed by treating 4 8 with TsOH in EtOH <96T(52)10225>. 

The regiochemistry of Al-H addition to unsymmetrically substituted alkynes can be significantly altered by the presence of a catalyst. This was first shown by Eisch and Foxton in the nickel-catalyzed hydroalumination of several disubstituted acetylenes [26, 32]. For example, the product of the uncatalyzed reaction of 1-phenyl-propyne (75) with BujAlH was exclusively ds-[3-methylstyrene (76). Quenching the intermediate organoaluminum compounds with DjO revealed a regioselectivity of 82 18. In the nickel-catalyzed reaction, cis-P-methylstyrene was also the major product (66%), but it was accompanied by 22% of n-propylbenzene (78) and 6% of (E,E)-2,3-dimethyl-l,4-diphenyl-l,3-butadiene (77). The selectivity of Al-H addition was again studied by deuterolytic workup a ratio of 76a 76b = 56 44 was found in this case. Hydroalumination of other unsymmetrical alkynes also showed a decrease in the regioselectivity in the presence of a nickel catalyst (Scheme 2-22). 

The hydroamination of alkynes with primary and secondary ahphatic amines necessitates the use of higher amounts of catalyst (17%) and higher temperatures, and TOFs are low (<1 h ) [260]. With ahphatic and aromatic terminal alkynes and a 5-fold excess of primary aliphahc amines, the products are the corresponding imines (40-78% yield, TOF up to 0.3 h ). In contrast to the CujClj-catalyzed reaction of phenylacetylene and secondary ahphatic amines (Scheme 4-12), the HgClj-catalyzed reachon is fully regioselechve for the Markovnikov hydroamination products which do not evolve under the reachon condihons (Eq. 4.66) [260]. 

The intramolecular addition of the O-H bond to alkynes catalyzed by palladium complexes has been developed by K. Utimoto et al. (Eq. 6.59) [104]. An alkynyl alcohol can be converted to a cyclic alkenyl ether in the presence of a catalytic amount of [PdCl2(PhCN)2 or [PdCl2(MeCN)2] in ether or THE at room temperature. When the reaction was carried out in MeCN-H20 under reflux in the presence of a catalytic amount of PdCl2, hydration of the acetylenic alcohol occurred and the ketoalcohol was obtained in good yield instead. 

Unlike the case of the Ni-catalyzed reaction, which afforded the branched thioester (Eq. 7.1), the PdCl2(PPh3)3/SnCl2-catalyzed reaction with 1-alkyne and 1-alkene predominantly provided terminal thioester 6 in up to 61% yield in preference to 7. In 1983, a similar hydrothiocarboxylation of an alkene was also documented by using a Pd(OAc)2/P( -Pr)3 catalyst system with t-BuSH to form 8 in up to 79% yield (Eq. 7.6) [16]. It was mentioned in the patent that the Pt-complex also possessed catalyhc activity for the transformation, although the yield of product was unsatisfactory. In 1984, the hydrothiocarboxylation of a 1,3-diene catalyzed by Co2(CO)g in pyridine was also reported in a patent [17]. In 1986, Alper et al. reported that a similar transformation to the one shown in Eq. (7.3) can be realized under much milder reaction conditions in the presence of a 1,3-diene [18], and the carboxylic ester 10 was produced using an aqueous alcohol as solvent (Eq. 7.7) [19]. 

This reaction exemplified that the regiochemistry of RS and H introduced by car-bonylahve addition differed from that of those by simple hydrothiolation. In the Rh-catalyzed hydrothiolation, the ArS group added to the terminal carbon and H to the internal carbon (Eq. 7.12). On the other hand, in the Rh-catalyzed thioformylation, RS was placed at internal carbon and formyl at the terminal carbon in spite of using the same catalyst precursor, [RhCljPPhsjs], which was also active for the thioformylation shown in Eq. (7.17). In 1997, the Pt-catalyzed hydrothiocarboxylation using RSH, alkyne and CO was reported to furnish 24 (Eq. 7.18), which showed the same regiochemistry as the Ni-catalyzed reaction shown in Eq. (7.1) [28]. 

It was described that the use of the combination of Pd(OAc)2/dppp /THE resulted in the highest yield. It is not clear whether such a combination of catalyst, ligand and solvent is restricted to the hydrothiocarboxylation of conjugated enynes or also may be applied to other alkynes. Furthermore, it remains to be explored whether, in the Pt-catalyzed reaction performed in CHjCN [see Eq. (7.18)], conjugated enynes can be used. 

The most synthetically valuable method for converting alkynes to ketones is by mercuric ion-catalyzed hydration. Terminal alkynes give methyl ketones, in accordance with the Markovnikov rule. Internal alkynes give mixtures of ketones unless some structural feature promotes regioselectivity. Reactions with Hg(OAc)2 in other nucleophilic solvents such as acetic acid or methanol proceed to (3-acetoxy- or (3-methoxyalkenylmercury intermediates,152 which can be reduced or solvolyzed to ketones. The regiochemistry is indicative of a mercurinium ion intermediate that is opened by nucleophilic attack at the more positive carbon, that is, the additions follow the Markovnikov rule. Scheme 4.8 gives some examples of alkyne hydration reactions. 

Cui, Q., Musaev, D. G., Morokuma, K., 1998a, Why do Pt(PR3)2 Complexes Catalyze the Alkyne Diboration Reaction, but Their Palladium Analogues Do Not A Density Functional Study , Organometallics, 17, 742. 

Mascarenas developed a synthetic method to 1,5-oxygen-bridged medium-sized carbocycles through a sequential ruthenium-catalyzed alkyne-alkene coupling and a Lewis-acid-catalyzed Prins-type reaction (Eq. 3.45). The ruthenium-catalyzed reaction can be carried out in aqueous media (DMF/H20 = 10 1).181... 

---