Alkenes oxidation catalysts

Because the thermal stability of polystyrenes and polymethacrylates is limited to 200°C, continuous use of a polymer-supported reactive species tends to be limited to significantly lower temperatures than this (see polymeric sulphonic acids). There is considerable interest in supporting, in particular, alkene oxidation catalysts on polymers and to operate reactions at temperatures above 200°C. To achieve this, novel thermo-oxidatively stable supports are required and some progress has been made in this direction. More details of specific applications will be given later, but supports based on, for example, polyacrylonitrile [50-52], polyamides [53-56], polysulphone [57, 58], polyaniline [59] and polybenzimidazole... 

Uses. Magnesium alkyls are used as polymerization catalysts for alpha-alkenes and dienes, such as the polymerization of ethylene (qv), and in combination with aluminum alkyls and the transition-metal haUdes (16—18). Magnesium alkyls have been used in conjunction with other compounds in the polymerization of alkene oxides, alkene sulfides, acrylonitrile (qv), and polar vinyl monomers (19—22). Magnesium alkyls can be used as a Hquid detergents (23). Also, magnesium alkyls have been used as fuel additives and for the suppression of soot in combustion of residual furnace oil (24). 

In the same spirit DFT studies on peroxo-complexes in titanosilicalite-1 catalyst were performed [3]. This topic was selected since Ti-containing porous silicates exhibited excellent catalytic activities in the oxidation of various organic compounds in the presence of hydrogen peroxide under mild conditions. Catalytic reactions include epoxidation of alkenes, oxidation of alkanes, alcohols, amines, hydroxylation of aromatics, and ammoximation of ketones. The studies comprised detailed analysis of the activated adsorption of hydrogen peroxide with... 

When the same [NiI (NHC)2] complexes are employed as alkene dimerisation catalysts in ionic liquid (IL) solvent [l-butyl-3-methylimidazolium chloride, AICI3, A-methylpyrrole (0.45 0.55 0.1)] rather than toluene, the catalysts were found to be highly active, with no evidence of decomposition. Furthermore, product distributions for each of the catalyst systems studied was surprisingly similar, indicating a common active species may have been formed in each case. It was proposed that reductive elimination of the NHC-Ni did indeed occur, as outlined in Scheme 13.8, however, the IL solvent oxidatively adds to the Ni(0) thus formed to yield a new Ni-NHC complex, 15, stabilised by the IL solvent, and able to effectively catalyse the dimerisation process (Scheme 13.9) [25-27],... 

Ceria-based OSC compounds may have an impact on oxidation reactions especially when the catalysts are working around the stoichiometry (as this is the case under TW conditions). One of the first systematic studies was reported by Yu Yao [53,54], Most results were obtained in 02 excess (0.5% CO + O.5% 02 or 0.1% HC+ 1% 02). Several series of Pt, Pd and Rh/Al203 of various dispersion, as well as metal foils, were investigated in CO, alkane and alkene oxidation. The effect of metal dispersion in CO and the propane oxidation are shown in Figure 8.5. 

The intercalated catalysts can often be regarded as biomimetic oxidation catalysts. The intercalation of cationic metal complexes in the interlamellar space of clays often leads to increased catalytic activity and selectivity, due to the limited orientations by which the molecules are forced to accommodate themselves between sheets. The clays have electrostatic fields in their interlayer therefore, the intercalated metal complexes are more positively charged. Such complexes may show different behavior. For example, cationic Rh complexes catalyze the regioselective hydrogenation of carbonyl groups, whereas neutral complexes are not active.149 Cis-Alkenes are hydrogenated preferentially on bipyridyl-Pd(II) acetate intercalated in montmorillonite.150 The same catalyst was also used for the reduction of nitrobenzene.151... 

Recently, we have demonstrated another sort of homogeneous sonocatalysis in the sonochemical oxidation of alkenes by O2. Upon sonication of alkenes under O2 in the presence of Mo(C0) , 1-enols and epoxides are formed in one to one ratios. Radical trapping and kinetic studies suggest a mechanism involving initial allylic C-H bond cleavage (caused by the cavitational collapse), and subsequent well-known autoxidation and epoxidation steps. The following scheme is consistent with our observations. In the case of alkene isomerization, it is the catalyst which is being sonochemical activated. In the case of alkene oxidation, however, it is the substrate which is activated. 

It has been pointed out earlier that the anti/syn ratio of ethyl bicyclo[4.1,0]heptane-7-carboxylate, which arises from cyclohexene and ethyl diazoacetate, in the presence of Cul P(OMe)3 depends on the concentration of the catalyst57). Doyle reported, however, that for most combinations of alkene and catalyst (see Tables 2 and 7) neither concentration of the catalyst (G.5-4.0 mol- %) nor the rate of addition of the diazo ester nor the molar ratio of olefin to diazo ester affected the stereoselectivity. Thus, cyclopropanation of cyclohexene in the presence of copper catalysts seems to be a particular case, and it has been stated that the most appreciable variations of the anti/syn ratio occur in the presence of air, when allylic oxidation of cyclohexene becomes a competing process S9). As the yields for cyclohexene cyclopropanation with copper catalysts [except Cu(OTf)2] are low (Table 2), such variations in stereoselectivity are not very significant in terms of absolute yields anyway. 

Further efficient ligands for the epoxidation of alkenes have been reported by Pozzi, but using PhIO as the oxidant and pyridine V-oxide as an additive in FBS.[7, 51-53] Chiral (salen)Mn complexes have been synthesised, which are soluble in fluorous solvents and active in the epoxidation of a variety of alkenes. The catalysts were of the form shown in Figure 6.14. 

The direct conversion of propene to its epoxide, in near quantitative yields, with aqueous H202 will be environmentally more benign. One of the unique features of TS-1 as a solid oxidation catalyst is its ability to utilize aqueous H202 as the oxidant for such conversions. This ability of TS-1 derives from the fact that silicalite-1 is hydrophobic, in contrast to the hydrophilic amorphous Ti-Si02. Consequently, hydrophobic reactants, such as alkenes, are preferentially adsorbed by TS-1, thus precluding the strong inhibition by H20 observed with amorphous Ti-Si02. 

Catalyst Alkene Oxidizing agent Stage 1 alkene to epoxide Stage 2 epoxide to cyclic carbonate ... 

Knops-Gerrits, P.-P., De Vos, D., Thibault-Starzyk, F. and Jacobs, P. A. Zeolite-encapsulated Mn(II) complexes as catalysts for alkene oxidation, Nature, 369 (1994), 543-546... 

On the other hand, in cyclic ethers (alkene oxides, oxetans, tetrahydrofuran) and formals the reaction site is a carbon-oxygen bond, the oxygen atom is the most basic point, and, hence, cationic polymerization is possible. The same considerations apply to the polymerization of lactones Cherdron, Ohse and Korte showed that with very pure monomers polyesters of high molecular weight could be obtained with various cationic catalysts and syncatalysts, and proposed a very reasonable mechanism involving acyl fission of the ring [89]. 

The first chapter concerns the chemistry of the oxidation catalysts, some 250 of these, arranged in decreasing order of the metal oxidation state (VIII) to (0). Preparations, structural and spectroscopic characteristics are briefly described, followed by a summary of their catalytic oxidation properties for organic substrates, with a brief appendix on practical matters with four important oxidants. The subsequent four chapters concentrate on oxidations of specific organic groups, first for alcohols, then alkenes, arenes, alkynes, alkanes, amines and other substrates with hetero atoms. Frequent cross-references between the five chapters are provided. 

---