Adhesion silane

Adhesive/silane Bond strength (MPa) Type of failure... 

Keywords Adhesion silane composites hydrophobic silane crosslinked silane ionomer bonding. 

There are a number of silane adhesion promoters available, and they differ in the nature of their reactivity to the resin or adhesive. Silanes may be produced with amine, epoxy, mercaptan, and other functionalities. Some examples are given in Table 10.1. 

Adhesion is a complex phenomenon based on a number of different mechanisms. In contrast to simple mechanical adhesion, silanes enable a sealant to bond chemically to a substrate, resulting in more durable adhesion. The bond is less susceptible to the negative effects of moisture and temperature. The nature of the substrate surface also plays an important role in achieving good adhesion. The more chemically active sites (preferably hydroxyl groups) the substrate has, the... 

Urethane sealants have good inherent adhesion to most substrates, but silane adhesion promoters are often used to improve this adhesion. Epoxy-, amino-, and mercapto-functional silanes are the most common because of their dual reactive nature. The silane end can react with surface hydroxyls the epoxy, amino, or mercapto end can react with the isocyanate. 

Adhesion promoting silanes are often added to improve adhesion to various substrates. As is the case with urethane sealants, silanes with a dual-reactive nature are typically used. Examples of such silanes are mercapto- and epoxy-functional silanes. Organic titanates may also be used. 

Oxane bonds, M—O—Si, are hydroly2ed during prolonged exposure to water but reform when dried. Adhesion in composites is maintained by controlling conditions favorable for equiUbrium oxane formation, ie, maximum initial oxane bonding, minimum penetration of water to the interface, and optimum morphology for retention of silanols at the interface. The inclusion of a hydrophobic silane, such as phenyltrimethoxysilane [2996-92-17, with the organofunctional silane increases thermal stabiUty of the silane and make the bond more water resistant (42). 

Patterns of ordered molecular islands surrounded by disordered molecules are common in Langmuir layers, where even in zero surface pressure molecules self-organize at the air—water interface. The difference between the two systems is that in SAMs of trichlorosilanes the island is comprised of polymerized surfactants, and therefore the mobihty of individual molecules is restricted. This lack of mobihty is probably the principal reason why SAMs of alkyltrichlorosilanes are less ordered than, for example, fatty acids on AgO, or thiols on gold. The coupling of polymerization and surface anchoring is a primary source of the reproducibihty problems. Small differences in water content and in surface Si—OH group concentration may result in a significant difference in monolayer quahty. Alkyl silanes remain, however, ideal materials for surface modification and functionalization apphcations, eg, as adhesion promoters (166—168) and boundary lubricants (169—171). 

The formation of covalent bonds between resin molecules in a coating and the surface of the substrate can enhance adhesion. Thus, adhesion to glass is promoted by reactive silanes having a trimethoxysilyl group on one end that reacts with a hydroxyl group on the glass surface. The silanes have... 

---