Additional Morphologies

As previously demonstrated, the shear rheological properties are an important factor relevant for the processing and foaming. In addition, morphological features of the blend system can be detected at low shear rates [95], The shear viscosity and the storage modulus of the present blends are highlighted in Fig. 32. An in-... 

Algae are not as well differentiated as terrestrial vascular plants. However, tissues within individual algae can be substantially different in their ecological roles and chemical compositions. Algae can be divided into support and attachment tissues such as holdfasts, stipes, and midribs, reproductive tissues such as receptacles and sporophylls, meristematic tissues, and blade tissues, which are non-reproductive, nonmeristematic tissues that do not function in attachment or support. Within these tissue types are additional morphological divisions such as cortical and medullary tissues and tissues that differ in age. 

J.) additional morphological clarification can be acquired without any difficulty during a cholecystectomy, particularly with suspected concomitant hepatobiliary disease (lOO, 126, 181),... 

In the present case after a rough test no major deviations from the ideal DlP/Au model system could be detected but further, more detailed studies using high-resolution electron spectroscopies with synchrotron radiation and additional morphological techniques such as AFM may reveal subtle differences. These will be performed after optimisation of the lift-off technique which is presently under way and will be applied completely under UHV conditions, thus allowing the minimisation of spurious influences. Then further investigations on buried interfaces combining XPS, UPS, IPES, NEXAFS, and AFM will be performed on the present and several other systems which are a matter of present research. 

In addition, morphology of the isolate was examined by transmission electron microscopy (TEM) according to standard methods. 

Some polymers (e.g., polyacetylene and polythiophene ) exhibit an additional morphological heterogeneity consisting of fibrils of dense material dispersed in a void, such that the polymer material and dopants occupy only about 50% of the volume. Although the sample is formally heterogeneous within the solid material, constituent phases are in such close proximity that not only may it be difficult to distinguish a boundary between them, but the constituents of the microdomains themselves are uncertain. Even single crystals which have been... 

This chapter has shown that it is possible to include reasonable estimates of the vibrational behaviour of a structure at the stage of conceptual design. This is achieved by the introduction of an additional morphological indicator the indicator of the first natural frequency... 

An additional morphology may occur in the event of "anodal pacing. "See pages 105-8 lor further explanation. 

---