Acetylacetone, hydrogenation

Neupokoev et al. prepared Raney cobalt catalyst modified with tartaric acid and found that the active catalyst can be prepared by etching the Co-Al alloy with 20.3% Co content. Hydrogenation of EAA gave product with only an ee of 4%. However, Raney cobalt catalyst (RCo) prepared from Co-Al alloy with 35.5% Co content and modified with amino acids was more active in the hydrogenation of EAA and acetylacetone. Hydrogenation with an RCo-S-Leucine catalyst resulted in EHB with an ee of 8.8%... 

Triisohutylaluminum/acetylacetonate Hydrogenation of carbon-carbon double bonds... 

Adducts of BF and some organic compounds having labile hydrogen atoms in the vicinity of the atom bonding to the boron atom of BF may form a derivative of BF by splitting out HF. For example, P-diketones such as acetylacetone or benzoylacetone react with BF in benzene (38) ... 

Ketones with labile hydrogen atoms undergo enol acetylation on reaction with ketene. Strong acid catalysis is required. If acetone is used, isoptopenyl acetate [108-22-5] (10) is formed (82—85). Isopropenyl acetate is the starting material for the production of 2,4-pentanedione (acetylacetone) [123-54-6] (11). 

With active methylene compounds, the carbanion substitutes for the hydroxyl group of aHyl alcohol (17,20). Reaction of aHyl alcohol with acetylacetone at 85°C for 3 h yields 70% monoaHyl compound and 26% diaHyl compound. Malonic acid ester in which the hydrogen atom of its active methylene is substituted by A/-acetyl, undergoes the same substitution reaction with aHyl alcohol and subsequendy yields a-amino acid by decarboxylation (21). 

The oxidation reaction between butadiene and oxygen and water in the presence of CO2 or SO2 produces 1,4-butenediol. The catalysts consist of iron acetylacetonate and LiOH (99). The same reaction was also observed at 90°C with Group (VIII) transition metals such as Pd in the presence of I2 or iodides (100). The butenediol can then be hydrogenated to butanediol [110-63-4]. In the presence of copper compounds and at pH 2, hydrogenation leads to furan (101). 

Any doubt about the existence of individual tautomers is now long past some tautomers can be crystallized separately (desmotropy), and others can be observed simultaneously in the same crystal (Section V,D,2) in summary, tautomers are not intrinsically different from isomers. Maybe it is worth mentioning that even two identical tautomers can differ. This is the case for the two intramolecular hydrogen-bonded (IMHB) enol tautomers of acetylacetone and for many NH-azoles they correspond to a doublewell profile for the proton transfer with both wells having the same energy (autotrope). 

When the nucleophile is a stabilized carbanion such as the enolate of acetylacetone, 1-benzoylacetophenone, diethylmalonate, or ethyl acetatoacetone, the reaction proceeds similarly. The monosubstituted complex is isolated as long as it contains an acidic hydrogen in the benzylic position. In addition, for the case of diketones CH2(COR)2 (R = Me, Ph, OEt), a deacetylation is observed in an acidic medium [92,93]. These features are the same as described above in the case of the substitution of Cl by stabilized carbanions in monochloroaromatics (the second chlorine being an inert arene substituent [99] Scheme XVII, Eq. (31) and Tables 10 and 11. 

Deposition occurs at much lower temperature (260-340°C) by the decomposition of metallo-organic compounds such as copper acetylacetonate, Cu(C5H202)2 or by the hydrogen reduction of the copper chelate, Cu(C5HFg02)2 at and more recently of... 

The nozzle of original design was fabricated from a niobium alloy coated with niobium silicide and could not operate above 1320°C. This was replaced by a thin shell of rhenium protected on the inside by a thin layer of iridium. The iridium was deposited first on a disposable mandrel, from iridium acetylacetonate (pentadionate) (see Ch. 6). The rhenium was then deposited over the iridium by hydrogen reduction of the chloride. The mandrel was then chemically removed. Iridium has a high melting point (2410°C) and provides good corrosion protection for the rhenium. The nozzle was tested at 2000°C and survived 400 cycles in a high oxidizer to fuel ratio with no measurable corrosion.O l... 

Hydrogen bond formation also leads to differences in chemical properties. For example, the enoli-zation reaction of 2,4-pentadione (acetylacetone) is assisted by the formation of an intramolecular hydrogen bond ... 

Reactions leading to the formation of the catalytically active nickel hydride species from organonickel precursors (Section III) can be regarded as model reactions for olefin oligomerization reactions. The reactions described by Eq. (8) and Scheme 3 (Section III) show that RNiX compounds (R = methyl orallyl, X = halide or acetylacetonate) activated by Lewis acids add to double bonds under mild reaction conditions (-40° or 0°C). It follows further from these reactions that under conditions leading to olefin dimerization a rapid nickel hydride /3-hydrogen elimination reaction occurs. The fact that products resulting from olefin insertion into the nickel-carbon bond are only observed when /3-hydride... 

Catalytic homogeneous hydrogenation of cyclohexene has been claimed for simple systems such as nickel(II) acetylacetonate [39] or a nickel-chloride complex with two monodentate amines [40]. The latter complex was used as comparison for a heterogeneous catalyst obtained by impregnation of the complex on y-alu-mina [40]. SCRs of 100 were used at 30 atm. H2 and temperatures up to 100°C, resulting in conversions of only 20-35% after 1 h. 

As shown by Breslow et al. during the mid-1960s, most transition-metal alkox-ide or acetylacetonate complexes catalyze the hydrogenation of alkenes in the presence of an activator (Table 6.19) [5]. Other precursors have been used such as [CpCr(CO)3]2, but it is more difficult to understand how the active species are formed [133]. 

Two-step asymmetric hydrogenation of (3-diketones shows that the overall stereochemistry is determined by the catalyst and by the chirality of the intermediate hydroxy ketone. Thus partial hydrogenation of acetylacetone (2) catalyzed by Ru-... 

The curing reaction can be carried out thermally or with the addition of a catalyst. The thermal cure is strongly influenced by impurities associated with the synthesis. The greater the degree of monomer purity, the more slowly the thermal cure proceeds. If the monomer is sufficiently purified, the cure rate can be predictably controlled by the addition of catalysts. As with the aromatic cyanate esters, the fluoromethylene cyanate esters can be cured by the addition of active hydrogen compounds and transition metal complexes. Addition of 1.5 wt% of the fluorinated diol precursor serves as a suitable catalyst.9 The acetylacetonate transition metal salts, which work well for the aromatic cyanate esters,1 are also good catalysts. 

---