Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | f | g | h | i | j | k | l | m | n | o | p | q | r | s | t | u | v | w | x | y | z

   |<      <<      >>     > |    


Typical XPS spectra Fnim three diflerenl iransilioa nieials f59U lal nickel fnkkel oxide s shown for campurison .

Typical XPS spectra obtained from nickel compared with a spectrum for NiO.

Typical XPS spectra obtained from nickel with that of NiO for comparison. From Ref. 1, pg. 386 by permission see

Typical XPS spectra of MWNT.

Typical XPS spectrum obtained on a coated paper grade, where peaks due to emission of core electrons can be clearly seen. The positions of these peaks are used to identify the elements present and to provide information about their oxidation states and chemical surroundings. The intensities of the peaks are furthermore used for quantification

Typical XPS spectrum taken using 1253-eV photons . Reprinted with permission from D. P. Woodruff and T. A. Delchar, Modem Techniques of Surface Science, Cambridge University Press, 1990,

Typical XRD and EDAX data as a function of pyrolysis temperature forms. Case shown

Typical XRD pattern of aligned CNTs .

Typical XRD pattern of an MCM-41 type material ,

Typical XRD pattern of an MCM-4i type materiai ,

Typical XRD pattern of nAI CCP and relative phase content of samples of

Typical XRD pattern of synthesized Mg-Al LDH .

Typical XRD patterns

Typical XRD patterns and chronopotentiograms 2CH3 LiCI04 0.5 M and PC UAsFe IM solutions, as indicated. In both solutions, reversible Li insertion into graphite can not be obtained. The XRD patterns were measured ex situ., from electrodes whose galvanostatic processes in these solutions were stopped at points a, b, c, etc., as marked near the relevant voltage profiles presented in this figure. Patterns in a relate to the pristine electrodes. Reprinted from reference 64 with permission from Elsevier Science.

Typical XRD patterns for the HCMSC-supported Pt cathode catalyst, for the Pl VC cathode catalyst

Typical XRD patterns from polymer silicate hybrids, .

Typical XRD patterns of composite 70 Lao gSro 2peo 8Coo.203.x 30 Ceo.9Gdo.i calcined at different temperatures .

Typical XRD patterns of the carbon materials in capacitors. Reproduced with permission from Ref. 6, copyright , Electrochemical Society

Typical XRD patterns. SBA-2.

Typical XRD spectra of a morphotropic pzt ceramic with the corresponding peaks of the tetragonal phase.

Typical XRF spectra of 10 pm regions of bone from turtle shell fragments collected from two contaminated sites and the control site Reprinted with permission of EDP Sciences from Hunter et al. 1997,

Typical Xylan Sequences, Showing Various Types of Branch. These are not distributed at random, but tend to occur in clusters. For details see the text.

Typical Yates-McClelland plots of the rate coefficients for hydrolysis of protonated aryl and primary aikyl acetates, in sulphuric acid solutions, against the activity of water. Data from

Typical yeUow-brownish aspect of a BC Ag NPs . Reproduced with permission from .

Typical yields of fast pyrolysis experiments with the pilot plant.



   |<      <<      >>     > |    

SEARCH



© 2024 chempedia.info