Zirconia electrolyte films fabrication methods

Empirical development of the nickel-zirconia anode over several decades has led to solid oxide fuel cells with adequate service life and performance, but fuel reforming is still required to operate with commercially available hydrocarbon fuels. It has become evident that the anode reactions are dominated by the three-phase boundary and that the microstructure of the composite cermet anodes is pivotal. Consequently, the processing methods used for making the anode powders, and the fabrication techniques used for deposition on the electrolyte are critical in making high performance anodes. Anode-supported cells with very thin electrolyte films are becoming interesting for operation at lower temperatures. 

The tape-casting method makes possible the fabrication of films in the region of several hundred micrometers thick. The mechanical strength allows the use of such a solid electrolyte as the structural element for devices such as the high-temperature solid oxide fuel cell in which zirconia-based solid electrolytes are employed both as electrolyte and as mechanical separator of the electrodes. 

---