Weaves types

The objective of the study is to determine the nature and extent of pseudomorphs on Spl by mapping, with photomicrography and statistical sampling techniques. The population to be studied consisted of all pseudomorphs after fabric located on the spearpoint. A survey previously conducted with microscopy identified the general location of the mineralized fabrics. A research hypothesis, derived from the survey of evidence, governed the study and is as follows Pseudomorphs after fabric located on Spl are fragments of an unbalanced plain-weave type of fabric. 

The desired visual pattern (18) ean be printed only on the surface of the scrim (20). If the scrim (20) is an open or weave type, the printed visual (18) is localized only on the scrim, thereby producing a discontinuous pattern that follows the detail of the serim s eonstruetion. It is also possible to embed the scrim into the vinyl base layer (24) to produce a smooth surface that can be printed. In this instanee, the print image is not confined to the scrim surface. 

Weave type and number of binding points between warp and fill... 

Figure 2.18 Wire cloth weave patterns (Bruncher, 1984). The numbers refer to those used in Table 2.15 to identify the mesh and weave types.

Screen Type Weave Type Orientation Symons (1974) Wicking Effective Diameter, Dodge Fries et ai. (2000) (2007) (pm) Hastings etai. (2011)... 

Ranking Screen Type Weave Type Critical Mass Flux (kg/(m s))... 

Screen Type Weave Type LHz NBP Bubble Point (kPa)... 

Screen Type Weave Type Total Required Screen Area (m ) Channel Aero Capture Width (cm) Propulsive Capture... 

Figure 24 ID chains showing a weave-type entanglement s ...

---