Wastewater engineering references

This has led to an increased interest in the elucidation of the mechanistic details of such reactions and the photocatalytic properties of particulate semiconductors for the purposes of either trying to improve process efficiency prior to engineering scale-up or, in the case of acid rain production, deliberate inhibition. Indeed, as has been noted by Ollis and Al-Ekabi [44] and more recently reiterated by Hoffmann et al. [45], the average publication rate over the last 10 years in the areas of water, air and wastewater treatment alone exceeds 200 papers per year. The publication of authoritative review articles on colloidal semiconductors over the last decade has been correspondingly prolific [44-68] and the interested reader is referred to them for information beyond the scope of this review. 

Refer to the oil and grease analysis method in Ref. 1 and implement the appropriate procedure. For a wastewater sample, the procedure below has been developed in the Environmental Engineering Research Analytical Laboratories for your use. For wastewater samples, follow the procedure outlined below. If a percent recovery study is required, the procedure that immediately follows provides guidance for this study ... 

Cheremisinoff, N. P. 2001. Handbook of Water and Wastewater Treatment Technologies. Boston, MA Butterworth-Heinemann. A handbook aimed at process and plant engineers, water treatment operators, and environmental consultants, this reference contains practical information for the treatment of drinking water and wastewater. 

The Michaelis-Menten kinetics model, illustrated for a lake in Example 2.20, may also be applied to a flowing stream in which the microorganisms are attached to the surfaces of the charmel, have a relatively steady cell density, and are exposed to the full chemical concentration in the stream (Cohen et al., 1995 Kim et al., 1995). Microorganisms attached to solid surfaces form biofilms, as populations of attached microbes accumulate on top of one another, building up a layer of microbes embedded in an extracellular matrix which they secrete. Within biofilms, the microbial cell density X corresponds to the number of attached microorganisms divided by the volume of the biofilm. In wastewater treatment engineering, a biofilm is often referred to as attached growth. A biofilm may also be called a bacterial... 

---