Waste continued basic principles

Speaking abstractly, this fifth principle gives the basic principles of Lean Management a circle structure, which means that there will always be potential waste that may be identified and eliminated by the cycling use of the presented Lean-Management principles. Moreover, several Kaizen fundamentals have been specified to identify potential improvements, such as 3 Mu Muda, concretion of seven kinds of waste Muri, overwork of employees or machines respectively and Mura, unevenness considering production processes. Moreover, 5 5 is an approach to improve workplaces continuously in five steps. Finally, Poka-yoke is a systematic detection and prevention of mistakes. 

Basic science and the precondition of our lives lead to the cyclic principle. This means that waste must not systematically accumulate in Nature, and that reconstitution of material quality must be at least as large as its dissipation. Consequently, all matter must be processed in cycles. This avoids a systematic shift in environmental parameters and enables the continuing diversity of Nature and human activity. 

To circumvent the various limitations of the basic technique, several continuous zone refining methods have been developed in which feed enters at one point in the sample while the product and waste leave at other points (Figure 4). The effect of countercurrent movement of solid and liquid phases is achieved by the movement of molten zones. In addition to the horizontal continuous refiner, the zone void vertical refiner and zone transport refiner are other modifications of this class. Cross-flow zone refiners and rotating drum multistage crystallizers based on the above principle are mainly used in growing single crystals rather than in purification of materials. 

---