Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Vacuum treatment, deaeration

Post-treatment of the desalted permeate from the reverse osmosis unit (Section 7.2.1.2) consists of the addition of CI2 and Ume for disinfection and corrosion protection. If H2S is present, it is eliminated by air stripping. For brackish-water feeds containing hydrocarbons, an activated carbon adsorber is used to remove dissolved hydrocarbons prior to microfiltration, which is followed by steps needed during the pretreatment and post-treatment processes dechlorination is required as a pretreatment if the RO membrane for desalination cannot tolerate residual chlorine dissolved otcygen is often removed to avoid damaging the RO membrane via vacuum based deaeration or addition of sodium bisuMte. An introduction to the pretreatment and post-treatment processes for membrane based sea-water and brackish-water desalination has been provided by Williams et al. (2001). The scale of such desalination plants is quite large, as much as 87 million gallons per day at Ashkelon, Israel, for example. [Pg.852]


See other pages where Vacuum treatment, deaeration is mentioned: [Pg.328]    [Pg.258]    [Pg.7]    [Pg.1144]    [Pg.967]    [Pg.52]    [Pg.1313]    [Pg.1314]    [Pg.1148]    [Pg.117]    [Pg.209]    [Pg.6336]    [Pg.158]    [Pg.147]    [Pg.118]   
See also in sourсe #XX -- [ Pg.258 ]




SEARCH



Deaerate

Deaerating

Deaeration

Deaeration vacuum

Deaerator

Vacuum deaerator

Vacuum treatment

© 2024 chempedia.info