Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Unsaturated polyester UP

E/TFE = ethylene/tetrafluoroethylene, E/CTFE = ethylene/chlorotrifluoroethylene, EPE = oxide, E/VAL = ethylene/vinyl alcohol, FEP = tetrafluoroethylene/hexafluoropropylene, FU = furan, pA = polyamide, PCTFE = polychlorotrifluoroethyl-ene, HDPE = high-density polyethylene, PF = propylene formaldehyde, PFA = perfluoro alkoxyalkane, PP = polypropylene, PTFE = polytetrafluoroethylene, PUR = polyurethane, PVC = polyvinyl chloride, PVDF = polyvinylidene fluoride, UP = unsaturated polyester, UP-GF = fiberglass-reinforced unsaturated polyester, VE-GF = fiberglass-reinforced vinyl ester, FU-GF = fiberglass-reinforced furane, EP-GF = fiberglass-reinforced ester, CR = chloroprene rubber, CSM = chlo-rosulfonyl polyethylene, FPM = vinylidene fluoride/hexafluoropropylene copolymer, HR = isobutane-isoprene rubber, NBR = nitrile-butadiene rubber, NR = natural rubber, SBR = styrene-butadiene rubber. [Pg.637]

PEEK PES PET PEK PMMA Polyetherether ketone Polyether sulfone Polyethylene terephthalate Polyetherketone Polymethylmethacrylate UP Unsaturated polyester... [Pg.13]

UP Unsaturated polyester Vestopal United States Rubber Company... [Pg.2356]

SMA styrene maleic anhydride UP unsaturated polyester resin... [Pg.1119]

Figure 1 Cost-related (specific) flexural strength of major thermoplastics, versus cost-related (specific) thermal tolerance. The unit cost is the market price in US cents (1992) of 1 cm plastics. The thermal tolerance is the temperature difference (AT) over room temperature (AT — T - room T), by which temperature (7 ) the flexural modulus is equal to 1 GPa. Designations, abbreviations WFRP-S, wood fiber reinforced PP (S type) of AECL, Canada (See Table 1) PMMA, polymethylmethacrylate PVC, pol)winyl chloride PS, polystyrene PP, polypropylene UP, unsaturated polyesters PA-GF, glass fiber (35%) reinforced polyamide PHR, phenolic resin EP, epoxy resin ABS, acrylonitrile/butadiene/styrene copolymer UF, urea/formaldehyde LDPE, low density polyethylene PC, polycarbonate POM, polyoxymethylene CAB, cellulose acetate butyrate LCP, liquid crystal polymers PEEK, polyether-etherketone PTFE, polytetrafluorethylene. Figure 1 Cost-related (specific) flexural strength of major thermoplastics, versus cost-related (specific) thermal tolerance. The unit cost is the market price in US cents (1992) of 1 cm plastics. The thermal tolerance is the temperature difference (AT) over room temperature (AT — T - room T), by which temperature (7 ) the flexural modulus is equal to 1 GPa. Designations, abbreviations WFRP-S, wood fiber reinforced PP (S type) of AECL, Canada (See Table 1) PMMA, polymethylmethacrylate PVC, pol)winyl chloride PS, polystyrene PP, polypropylene UP, unsaturated polyesters PA-GF, glass fiber (35%) reinforced polyamide PHR, phenolic resin EP, epoxy resin ABS, acrylonitrile/butadiene/styrene copolymer UF, urea/formaldehyde LDPE, low density polyethylene PC, polycarbonate POM, polyoxymethylene CAB, cellulose acetate butyrate LCP, liquid crystal polymers PEEK, polyether-etherketone PTFE, polytetrafluorethylene.
Figure 1 Polymer interpretation chart. PAI, polyamideimide PC, polycarbonate UP, unsaturated polyester PDAP, diarylate phtalate resin VC-VAc, vinyl chloride-vinyl acetate copolymer PVAc, polyvinyl acetate PVFM, polyvinyl formal PUR, polyurethane PA, polyamide PMA, methacrylate ester polymer EVA, ethylene-vinyl acetate copolymer PF, phenol resin EP, epoxide resin PS, polystyrene ABS, acrylonitrile-butadiene-styrene copolymer PPO, polyphenylene oxide P-SULFONE, poly-sulfone PA, polyamide UF, urea resin CN, nitrocellulose PVA, polyvinyl acetate MC, methyl cellulose MF, melamine resin PAN, polyacrylonitrile PVC, polyvinyl chloride PVF, polyvinyl fluoride CR, polychloroprene CHR, polyepichlorohydrin SI, polymethylsiloxane POM, polyoxy-methylene PTFE, polytetrafluoroethylene MOD-PP, modified PP EPT, ethylene-propylene terpolymer EPR, ethylene-propylene rubber PI, polyisoprene BR, butyl rubber PMP, poly(4-methyl pentene-1) PE, poly(ethylene) PB, poly(butene-l). (Adapted from Ref. 22, p. 50.)... Figure 1 Polymer interpretation chart. PAI, polyamideimide PC, polycarbonate UP, unsaturated polyester PDAP, diarylate phtalate resin VC-VAc, vinyl chloride-vinyl acetate copolymer PVAc, polyvinyl acetate PVFM, polyvinyl formal PUR, polyurethane PA, polyamide PMA, methacrylate ester polymer EVA, ethylene-vinyl acetate copolymer PF, phenol resin EP, epoxide resin PS, polystyrene ABS, acrylonitrile-butadiene-styrene copolymer PPO, polyphenylene oxide P-SULFONE, poly-sulfone PA, polyamide UF, urea resin CN, nitrocellulose PVA, polyvinyl acetate MC, methyl cellulose MF, melamine resin PAN, polyacrylonitrile PVC, polyvinyl chloride PVF, polyvinyl fluoride CR, polychloroprene CHR, polyepichlorohydrin SI, polymethylsiloxane POM, polyoxy-methylene PTFE, polytetrafluoroethylene MOD-PP, modified PP EPT, ethylene-propylene terpolymer EPR, ethylene-propylene rubber PI, polyisoprene BR, butyl rubber PMP, poly(4-methyl pentene-1) PE, poly(ethylene) PB, poly(butene-l). (Adapted from Ref. 22, p. 50.)...
UP Unsaturated polyester BIP BASF Cray Valley DSM Scott Bader Beetle Palatal Synojcct Flomat/Freeflof Stypol Crystic... [Pg.180]

UA urea, unsaturated UD unidirectional UDC unidirectional composite UF urea formaldehyde UHMWPE ultra-high molecular weight polyethylene (PE-UHMW) UL Underwriters Laboratory UM University of Massachusetts UN United Nations UP unsaturated polyester (TS polyester)... [Pg.491]

UP Unsaturated polyester Reproduced with permission from M.S. Helal in Experimental Study of Mechanical Properties and Structural Applications of Polymer Concrete, University of Texas, Austin, TX, USA, 1990 [PhD Thesis], 1990, University of Texas [17] ... [Pg.52]

Tables 10 and 11 show pultruded materials with glass fiber and carbon fiber respectively. For both tables the following abbreviations have been used PP-polypropylene, PMMA-poly (methyl methacrylate), PU-polyurediane, NY6-nylon 6, PPS-polyphenylene sulfide, UP-unsaturated polyester, PH-phenolic resin and ABS-acrylobutadiene styrene. Tables 10 and 11 show pultruded materials with glass fiber and carbon fiber respectively. For both tables the following abbreviations have been used PP-polypropylene, PMMA-poly (methyl methacrylate), PU-polyurediane, NY6-nylon 6, PPS-polyphenylene sulfide, UP-unsaturated polyester, PH-phenolic resin and ABS-acrylobutadiene styrene.
Figure 6.3 TGA curves of composites carried out under 02 atmosphere (UP unsaturated polyester A adipate S 2-methyl-2-propene-l-sulfonate LDH loadings were 1 or 5%). Reprinted from Polymer Degradation and Stability, Vol. 94, C. M. C. Pereira, M. Herrero, F. M. Labajos, A. T. Marques and V. Rives, Preparation and properties of new flame retardant unsaturated polyester nanocomposites based on layered double hydroxides, pp. 939-946, 2009, with permission from Elsevier. Figure 6.3 TGA curves of composites carried out under 02 atmosphere (UP unsaturated polyester A adipate S 2-methyl-2-propene-l-sulfonate LDH loadings were 1 or 5%). Reprinted from Polymer Degradation and Stability, Vol. 94, C. M. C. Pereira, M. Herrero, F. M. Labajos, A. T. Marques and V. Rives, Preparation and properties of new flame retardant unsaturated polyester nanocomposites based on layered double hydroxides, pp. 939-946, 2009, with permission from Elsevier.
See other pages where Unsaturated polyester UP is mentioned: [Pg.946]    [Pg.183]    [Pg.898]    [Pg.405]    [Pg.652]    [Pg.931]    [Pg.115]    [Pg.127]    [Pg.302]    [Pg.615]    [Pg.100]    [Pg.652]    [Pg.31]    [Pg.810]    [Pg.429]    [Pg.371]    [Pg.533]    [Pg.155]    [Pg.2173]    [Pg.141]    [Pg.1116]    [Pg.624]    [Pg.265]    [Pg.483]    [Pg.746]    [Pg.953]    [Pg.50]    [Pg.75]    [Pg.398]    [Pg.2]    [Pg.700]    [Pg.701]    [Pg.598]    [Pg.909]    [Pg.919]    [Pg.483]    [Pg.4]    [Pg.14]    [Pg.1590]    [Pg.322]   
See also in sourсe #XX -- [ Pg.216 , Pg.344 ]



SEARCH



R04 Unsaturated polyester UP

Unsaturated polyesters

© 2024 chempedia.info