Types of Reactive Polymers Used in Blending

2 Reactive Polymers with Carboxylic Acid Functionality. . .  

4 Reactive Polymers Containing Primary and Secondary Amines. 

In this chapter general strategies for the compatibilization of polymer blends and the functionalization of polymers are briefly reviewed, which is followed by a detailed summary of a variety of reactive polymers, the chemical reactions they undergo, and their applications. 

---

Types of Reactive Polymers Used in Blending 17 2.2.2.4 Reactive Compatibilization... 

In comparing the different blends, the specific advantages of each type, as well as any potential overlap in performance with other type of blends have also been discussed. The fundamental advantage of polymer blends viz. their ability to combine cost-effectively the unique features of individual resins, is particularly illustrated in the discussion of crystalline/amorphous polymer blends, such as the polyamide and the polyester blends. Key to the success of many commercial blends, however, is in the selection of intrinsically complementing systems or in the development of effective compatibilization method. The use of reactive compatibilization techniques in commercial polymer blends has also been illustrated under the appropriate sections such as the polyamide blends. 

An important use of bromine compounds is in the production of flame retardants (qv). These are of the additive-type, which is physically blended into polymers, and the reactive-type, which chemically reacts during the formation of the polymer. Bromine compounds are also used in fire extinguishers. Brominated polymers are used in flame retardant appHcations and bromine-containing epoxy sealants are used in semiconductor devices (see... 

Characteristic functions and the representative structures of plastics additives providing marketable and durable materials are included in this chapter. Types of additives for plastics used in contact with food are listed in Table 3-1. Similar additives as for PS are used for elastomer-modified plastics forming multilayer systems (blends) and used rather exceptionally in contact with food, such as high-impact polystyrene (HIPS) or acrylonitrile-butadiene-styrene polymer (ABS). Some of the additives, stabilizers in particular, are very reactive and are present in the plastic matrix in a chemically transformed form. 

CPB Materials. Various types of silane crosslinkers were employed to fabricate crosslinked polymer blend (CPB) dielectrics in this study (Fig. 4). The reactivity of each crosslinker was tested via in situ NMR kinetic studies. The CPB dielectrics were fabricated on various substrates using mixture of polymer and crosslinker solution via spin-coating and gravure-printing. Organic semiconductors and source/ drain electrodes were vacuum-deposited to complete the OFET device. Dielectric and OFET properties were measured under vacuum and ambient as described previously. 

A more advantageous alternative is to prepare compatibUized PA/PO blends, like many other types of blends, by reactive processing that implies creation of composites with a required level of interphase interaction in situ during compounding (18). Grafted polymers, whose macromolecules contain necessary functional groups, are most often used as compatibilizers. 

---