Trichloroacetonitrile, with

However, the successful isolation of an iminoborane derivative in the reaction of trichloroacetonitrile with diborane indicated that the stability of imino-boranes is not only a function of the nature of the borane but also of that of the imine 16>. 

Imidazole-2-carboxylates can be made by amidine cyclization (see Section 2.2.1 and Table 2.2.2), by reaction of an aminocarbonyl compound with thioxamate (see Section 4.1 and Scheme 4.1.6), and from 1-cyano-or 1-carbethoxy-substituted 4-amino-2-azabutadienes (see Section 3.2 and Scheme 3.2.3). An improved amidine cyclization treats trichloroacetonitrile with ami noacetaldehyde dimethyl acetal to give the amidine (5), which cyclizes with trifluoroacetic acid at room temperature to give 2-trichloromethylimidazole (Scheme 8.3.2). This is not purified, but converted immediately into ethyl imidazole-2-carboxylate or imidazole-2-carboxylic acid in high yields [10],... 

The corresponding reaction of trichloroacetonitrile with 2-aminonicoti nonitriles in the presence of piperidine yields 2-(trichloromethyl)pyrido[2,3-rf]pyrimidin-4-ainines. Workup in boiling water or ethanol removes the trichloromethyl group to give corresponding hydroxy or ethoxy compounds, e.g. 65.128... 

Preparation by reaction of trichloroacetonitrile with resorcinol in the presence of triflic acid (52%) [4592] or zinc chloride (55%) [4678]. 

Trichloroacetonitrile reacts with glycosidic hydroxy groups of protected sugars to form glycosyl trichloroacetimidates (R. R. Schmidt, 1980, 1984,1985,1986 B. Wegmann, 1988). The imidate is substituted by alcohols in the presence of trimethylsilyl trifluoromethanesulfonate... 

The reaction of ethyleneimine with nittiles in the presence of HBF gives A -imidazolines (229). If trichloroacetonitrile [545-06-2] (R = Cl) is used as the nitrile component, the intermediate amidine can be isolated (230). 

Benzyl groups are usually introduced by the Williamson reaction (Section 3.2.3). They can also be prepared under nonbasic conditions if necessary. Benzyl alcohols are converted to trichloroacetimidates by reaction with trichloroacetonitrile. These then react with an alcohol to transfer the benzyl group.183... 

O-Allyl imidate esters undergo [3,3]-sigmatropic rearrangements to /V-allyl amides. Trichloromethyl imidates can be made easily from allylic alcohols by reaction with trichloroacetonitrile. The rearrangement then provides trichloroacetamides of IV-allylamines.260... 

The later publication [1] reveals that the title compound is in fact a relatively stable compound. The previously attempted preparation of the then unknown compound from trichloroacetonitrile, sodium azide and ammonium chloride (0.14 0.42 0.2 mol) by an analogous established method [2], but at lower initial temperature because of the exothermic reaction, gave, after vacuum evaporation of solvent, an oily product. When sampled with a pipette, this evolved gas and then exploded violently. It was thought that an azidomethyltetrazole may have been formed by displacement of chloro-substituent(s) by the excess azide employed [3], An alternative hypothesis which involved isomerisation of the title compound to the open chain azidoazomethine [4] was discounted, because no trace of this could be detected [1]. 

The Mukaiyama-Hoshino reaction between a nitroalkane and phenyl isocyanate generates a nitrile oxide, and this method has been used in the synthesis of 1,2,4-oxadiazoles as discussed in CHEC-II(1996) <1996CHEC-II(4)179>. In a more recent advance, nitroethane undergoes ultrasound-mediated cycloaddition with trichloroacetonitrile to give the extremely useful (see Equation 11) 5-trichloromethyl-l,2,4-oxadiazole 228 (Equation 45) <1995TL4471>. 

CF3CN and CCI3CN leads to the corresponding substituted oxadiazolines (74, 829). Thus, reactions of (746) and (747), derived from 1-deoxynojirimycin with trichloroacetonitrile in toluene at room temperature leads to bicyclic compounds (748) and (749) (Scheme 2.308). 

A B-Cl bond of pentafluorophenyldichloroborane adds quantitatively across the C=N group of trichloroacetonitrile and yields an equilibrium mixture of the monomeric and dimeric iminoborane derivative 26>. In contrast, benzon-itrile does not react at all with trichloroacetonitrile under comparable conditions 26 ... 

The reaction of tris(organothio)boranes with nitriles leads to B—S substituted iminoboranes. 1,2-addition of tris(methylthio)borane or tris(phenylthio) borane to trichloroacetonitrile yields the monomeric products (XIV) or (XV)32). 

The data in Fig. 7 demonstrate that in the presence of 15 micron solid particles, there is a slight or moderate impact on destruction kinetics. The destruction rate constant of trichloroacetonitrile (TCA) decreases by approximately 10% when the silica particle concentration is increased from 0 to 100 g L 1. In the presence of 10 nm silica (Fig. 8), the trends are similar, with slight to moderate decreases in the reaction rate constant as the silica particle concentration increases. 

Allenylcobaloximes, e.g. 26, react with bromotrichloromethane, carbon tetrachloride, trichloroacetonitrile, methyl trichloroacetate and bromoform to afford functionalized terminal alkynes in synthetically useful yields (Scheme 11.10). The nature of the products formed in this transformation points to a y-specific attack of polyhaloethyl radicals to the allenyl group, with either a concerted or a stepwise formation of coba-loxime(II) 27 and the substituted alkyne [62, 63]. Cobalt(II) radical 27 abstracts a bromine atom (from BrCCl3) or a chlorine atom (e.g. from C13CCN), which leads to a regeneration of the chain-carrying radical. It is worth mentioning that the reverse reaction, i.e. the addition of alkyl radicals to stannylmethyl-substituted alkynes, has been applied in the synthesis of, e.g., allenyl-substituted thymidine derivatives [64],... 

Dialkyl malonates were reacted with trichloroacetonitrile in methylene chloride in the presence of Ni(acac)2 catalyst under nitrogen at room temperature for 3 hr to give dialkyl (2,2,2-trichloro-l-aminoethylidene) malonates in 65% and 80% yields (86M15) (Scheme 29). 

Trichloroacetimidates, CCl,C(NH)OR, have been prepared under mild conditions by the reactions of alcohols with trichloroacetonitrile under basic conditions promoted by catalytic amounts of tetra-n-butylammonium hydrogen sulphate [72]. The procedure is far superior to the standard methods which normally require anhydrous reaction conditions. 

The complex (PPh4)[Os NC(CCl3)NCCl(CCl3) Cl5] may be regarded as an imido complex of osmium(VI), made by the reaction of OS2CI10 with trichloroacetonitrile and has been characterized by X-ray structural studies. The Os—N distance of 1.97 A is slightly shorter than that expected for a single bond. 

When 5-imino-A -l,2,4-thiadiazolines react with electrophilic reagents, rearrangement products are again isolated. For example, treatment of the thiadiazoline (57) with trichloroacetonitrile at... 

In contrast, the 5-phenyliminothiatriazoline (323) reacts as a masked 1,3-dipole with a variety of electrophilic nitriles. Tosyl cyanide and ethyl cyanoformate both react with (323) in refluxing chloroform to give initially (324) which then isomerizes to (325) as the reaction proceeds (Scheme 71) <91JHC333>. When the solvent is changed to acetone the reaction with the nitriles proceeds faster due to the formation of the adduct (326) which is capable of undergoing cycloaddition/elimination reactions at 20 °C. Trichloroacetonitrile does not react with (323) in chloroform solution in acetone,... 

Aminothiatriazole (328) reacts with a number of aryl cyanates at 0°C to afford 3-substituted 5-amino-l,2,4-thiadiazoles (17) in moderate yields. 5-Aminothiatriazole (328) also reacts with trichloroacetonitrile to give (17) (R = CCI3) in 92% yield. When these reactions are carried out at 30 °C, the thiadiazoles (17) react with a second mole of aryl cyanate to give the amidino compounds (329) (Scheme 72) <85JOCl295>. 

Trichloroacetonitrile reacts with 5-aminothiatriazole in a similar way to give the 3-substituted-5-amino-l,2,4-thiadiazole <85JOC1295>. Martin et al. discussed three different pathways for the formation of the 1,2,4-thiadiazole (117) (Scheme 23). 

If the C=N function is attached to an electron-withdrawing group, 1,3-dipolar cycloaddition with diazoalkanes occurs leading to 1,2,3-triazoles (5, 276). When diazomethane is used, the initially formed NH-triazole is not isolated due to a rapid subsequent NH deprotonation followed by N-methylation. Consequently, a mixture of the three Wmethyltriazoles is formed when methyl cyanoformate (71) (216) or trichloroacetonitrile (276) (217) is treated with excess diazomethane (Scheme 8.51). Huisgen and co-workers found that methyl diazoacetate reacts with TCNE by a 1,3-dipolar cycloaddition at the C=C bond and not, as published earlier by other authors, at one of the nitrile functions (72). 

Kang and co-workers prepared the (3-halo amide arrangement required for oxazoline formation from allylic alcohols via a two-step process. For example, treatment of the allylic alcohol 122 with trichloroacetonitrile and base followed by activation of the double bond with iodine monochloride, provides 123. Hydrolysis of 123 gave 124 from which cyclization provided the oxazoline 18a used for paclitaxel synthesis (Scheme 8.36). 

Allyl alcohols readily react with trichloroacetonitrile to give the corresponding trichloroacetimidates 145. Activation of the double bond with electrophilic reagents results in ring closure to yield oxazolines 146. The most commonly employed electrophiles include iodine, iodine monochloride, phenylselenyl chloride, and mercuric trifluoroacetate. Other nitriles including cyanogen bromide and N,N-dimethylcyanamide can also be used. Since oxazolines readily hydrolyze to amides, the net effect of this reaction sequence is to produce p-amino alcohols 147 from an allyl alcohol. This strategy has been employed in numerous total syntheses of natural products. Examples are listed in Table 8.18 (Fig. 8.7 Scheme 8.43). ° ... 

---