Transportation uniform load case

Transportation-Vertical Vessel on Two Saddles, Uniform Load Case, With Incorporation of Shipping Factors... 

The loading on each roll is generated by the belt, wire mesh, and/or transported product. The amount and distribution of the load varies depending on the wrap of the carried load. Wrap refers to the angular distance around the roll that touches the belt, wire mesh, or product. In most conveyor systems, the load is relatively uniform and is in a downward direction. In this case, the traditional vertical, horizontal, and axial mounting positions are acceptable. 

Figure 18. Orinoco River tributary Li isotope data (Huh et al. 2001). Tie lines connect samples pairs of dissolved (open symbol) and suspended load (filled symbol) for tributaries draining the Andes (circle) and those draining cratonic area (triangle). Isotopic compositions of suspended loads were similar in both cases, but the dissolved loads of Andes drainages were uniformly isotopically heavier. This difference was attributed not to lithology in the headwaters, but to transport- versus reaction-limited weathering conditions.

The nitrocellulose to be loaded into the centrifuge may be in lump form or compressed (taken directly from the transportation cases). To attain uniformity in the... 

---