Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Transition temperature effect

Biological membranes Fluidity and order parameters Determination of the phase transition temperature Effect of additives (e.g. cholesterol)... [Pg.153]

Fig. 12 Electrical resistivity of TiNi(51 at. %Ni) at around the martensitic transition temperature effect of thermal cycling in (a) no incomplete thermal cycling, (b) after six incomplete thermal cycling, (c) after several hundred incomplete thermal cycling. Complete and incomplete thermal cycling are defined in the text. Fig. 12 Electrical resistivity of TiNi(51 at. %Ni) at around the martensitic transition temperature effect of thermal cycling in (a) no incomplete thermal cycling, (b) after six incomplete thermal cycling, (c) after several hundred incomplete thermal cycling. Complete and incomplete thermal cycling are defined in the text.
Beastall, J., Hadgraft, J. and Washington, C. (1988). Mechanism of action of Azone as a percutaneous penetration enhancer Lipid bilayer fluidity and transition temperature effects. Int. J. Pharm. 45 207-213. [Pg.262]

Various viscosity models have implicitly included the effects of gelation on the chemoviscosity, and these were reviewed in Table 4.2 incorporating gelation-conversion and glass-transition-temperature effects implicitly in the cure effects on chemoviscosity. Explicit models for the expression of gel time versus temperature and time are sparse, with empirical measurements mainly being used. [Pg.336]

EP-g-MA (1.1% MA) (0-20) TEM / titration of residual amine groups / effects of extruder type, and PA mol. wt. and amine end-group concentration on morphology, mechanical properties and ductile-brittle transition temperature / effects of di- vs. mono-functional PA Oshinski et al., 1996 a, b, c, d... [Pg.360]

Priestley RD, Broadbelt LJ, Torkelson JM (2005) Physical aging of ultrathin polymer films above and below the bulk glass transition temperature effects of attractive vs neutral polymersubstrate interactions measured by fluorescence. Macromolecules 38 654—657... [Pg.105]

PA-6 (50-45) or PA-66 or PA-11 or PA-612 or PA-610 or PA-1212 or PA-6-66 copolymer/ABS (45-50)/imidized acrylate copolymer (56% methyl glutarimide, 40% MMA, 2% MAA, 1% glutarlc anhydride) (0-10) SSE at 240°C or two different types of TSE/torque rheometry/TEM/DSC/ mechanical properties vs. extrusion conditions and morphology/ductile-brittle transition temperatures/effects of PA amine end-group concentration Majumdar et al. 1994a... [Pg.562]

In Figure 2.4 the pressure-volume isotherm is shown at 25°C for polystyrene using the FOV equation of state. The characteristic parameters were obtained from Table 2.2. The EOS does not explicitly account for molecular weight and glass transition temperature effects. [Pg.34]


See other pages where Transition temperature effect is mentioned: [Pg.268]    [Pg.678]    [Pg.477]    [Pg.33]    [Pg.19]    [Pg.369]    [Pg.415]   
See also in sourсe #XX -- [ Pg.107 , Pg.115 , Pg.116 , Pg.117 ]




SEARCH



Transition effects

© 2024 chempedia.info