Centrifugal pumps total discharge head

Total head, centrifugal pumps, 180, 183 Discharge, 205 Head curve, 198 Suction head, 184, 186 Suction lift, 184, 186 Type, 184 Tubing, 63, 64 Two-phase flow, 124 Calculations, 125-127 Flow patterns, chart, 124 System pressure drop, 125 Types of flow, 124, 125 Utilities check list, process design, 34 Vacuum,... 

Suction and discharge heads are determined the same as for centrifugal pumps. Total head and capacity are used in selecting the proper rotary pump from a manufacturer s data or curves. Since viscosity is quite important in the... 

It is important to recognize that a centrifugal pump will operate only along its performance curve [10, 11]. External conditions will adjust themselves, or must be adjusted in order to obtain stable operation. Each pump operates within a system, and the conditions can be anticipated if each component part is properly examined. The system consists of the friction losses of the suction and the discharge piping plus the total static head from suction to final discharge point. Figure 3-51 represents a typical system head curve superimposed on the characteristic curve for a 10 by 8-inch pump with a 12-inch diameter impeller. 

A centrifugal pump is used to pump a liquid in steady turbulent flow through a smooth pipe from one tank to another. Develop an expression for the system total head A/t in terms of the static heads on the discharge and suction sides zd and zs respectively, the gas pressures above the tanks on the discharge and suction sides Pd and Ps respectively, the liquid density p, the liquid dynamic viscosity p, the gravitational acceleration g, the total equivalent lengths on... 

---