Titanium phase-formation process

Phase-Formation Processes of Titanium Nitrides During Combustion of Ferrotitanium in Nitrogen... 

One of the interesting examples of chemical stages in the SHS processes with lower phase formation is the occurrence of the metastable phase of e-Ti2N during titanium combustion in gaseous nitrogen. The combustion process in this system was studied in our work [22, 23] as well as in the works carried out by Japanese scientists Hirao et al. [24] and American colleagues Munir et al. [25]. 

Characteristics and implementation of the treatments depend on the expected results and on the properties of the material considered a variety of processes are employed. In ferrous alloys, in steels, a eutectoid transformation plays a prominent role, and aspects described by time-temperature-transformation diagrams and martensite formation are of relevant interest. See a short presentation of these points in 5.10.4.5. Titanium alloys are an example of the formation of structures in which two phases may be present in comparable quantities. A few remarks about a and (3 Ti alloys and the relevant heat treatments have been made in 5.6.4.1.1. More generally, for the various metals, the existence of different crystal forms, their transformation temperatures, and the extension of solid-solution ranges with other metals are preliminary points in the definition of convenient heat treatments and of their effects. In the evaluation and planning of the treatments, due consideration must be given to the heating and/or cooling rate and to the diffusion processes (in pure metals and in alloys). 

Various transition metals have been used in redox processes. For example, tandem sequences of cyclization have been initiated from malonate enolates by electron-transfer-induced oxidation with ferricenium ion Cp2pe+ (51) followed by cyclization and either radical or cationic termination (Scheme 41). ° Titanium, in the form of Cp2TiPh, has been used to initiate reductive radical cyclizations to give y- and 5-cyano esters in a 5- or 6-exo manner, respectively (Scheme 42). The Ti(III) reagent coordinates both to the C=0 and CN groups and cyclization proceeds irreversibly without formation of iminyl radical intermediates.The oxidation of benzylic and allylic alcohols in a two-phase system in the presence of r-butyl hydroperoxide, a copper catalyst, and a phase-transfer catalyst has been examined. The reactions were shown to proceed via a heterolytic mechanism however, the oxidations of related active methylene compounds (without the alcohol functionality) were determined to be free-radical processes. 

Powder Formation. Metallic powders can be formed by any number of techniques, including the reduction of corresponding oxides and salts, the thermal dissociation of metal compounds, electrolysis, atomization, gas-phase synthesis or decomposition, or mechanical attrition. The atomization method is the one most commonly used, because it can produce powders from alloys as well as from pure metals. In the atomization process, a molten metal is forced through an orifice and the stream is broken up with a jet of water or gas. The molten metal forms droplets to minimize the surface area, which solidify very rapidly. Currently, iron-nickel-molybdenum alloys, stainless steels, tool steels, nickel alloys, titanium alloys, and aluminum alloys, as well as many pure metals, are manufactured by atomization processes. 

---