Titanium mixed oxide scales

Other analytical problems to which the direct comparison method has been applied include the determination of mixed iron oxides in the oxide scale on steel [14.10], the beta phase in titanium alloys [14.11], and mixed uranium and plutonium carbides [14.12]. 

Finally, Rong and coworkers discuss the roll of surface oxygen on the MCS process75. Rong employed a lab-scale stirred bed reactor and then applied XPS to analyze the silicon samples before and after the reaction. The reactivity of silicon depended on the initial thickness of the native oxide on the silicon. After the reaction the surfaces of all of the samples were mostly covered with Si02. There was no observed correlation between the surface and bulk O content. XPS analysis showed the presence of Al, Ca and Ti impurities in some samples. Titanium on the surface appeared to increase the reactivity, whereas Ca decreased the selectivity of Di formation. Addition of ZnO to the silicon before CuCl improved reactivity and also decreased the induction period of the reaction. XPS studies of samples prepared in this manner exhibited a lower Zn surface concentration compared to the samples where CuCl, Si and ZnO were mixed together. 

Numerous ceramics are deposited via chemical vapor deposition. Oxide, carbide, nitride, and boride films can all be produced from gas phase precursors. This section gives details on the production-scale reactions for materials that are widely produced. In addition, a survey of the latest research including novel precursors and chemical reactions is provided. The discussion begins with the mature technologies of silicon dioxide, aluminum oxide, and silicon nitride CVD. Then the focus turns to the deposition of thin films having characteristics that are attractive for future applications in microelectronics, micromachinery, and hard coatings for tools and parts. These materials include aluminum nitride, boron nitride, titanium nitride, titanium dioxide, silicon carbide, and mixed-metal oxides such as those of the perovskite structure and those used as high To superconductors. 

---